01/03/2023 07:38:09

Ledningsnett – seterygg – sete på andre rad – høyre (7-seter) (fjerne og skifte ut)

Korrigeringskode 17100142 0.18 MERK: Hvis ikke noe annet er uttrykkelig oppgitt i prosedyren, gjenspeiler korrigeringskoden og FRT ovenfor alt arbeidet som kreves for å gjennomføre denne prosedyren, inkludert de tilknyttede prosedyrene. Ikke stable korrigeringskoder med mindre du bli uttrykkelig bedt om det.MERK: Se Flat rate-tider for å lære mer om FRT-er og hvordan de lages. Hvis du vil gi tilbakemelding om FRT-verdier, kan du sende en e-post til LaborTimeFeedback@tesla.com. MERK: Se Personlig beskyttelse for å forsikre deg om at du bruker riktig PVU når du gjennomfører prosedyren nedenfor.

Fjerne

  1. Open the RH doors and lower the RH windows.
  2. Move the RH front seat fully forward.
  3. Fold the RH 2nd row seat to the down position.
  4. Use the towel bar to move the RH 2nd row seat forward.
  5. Remove the RH 2nd row seat back panel. See Ryggpanel – sete på andre rad – høyre (fjerne og skifte ut).
  6. Remove the RH 2nd row seat shoulder switch. See Skulderbryter – seterygg – andre rad – venstre (fjerne og skifte ut).
  7. Remove the RH 2nd row toe kick cover. See Deksel – gulvlist – sete på andre rad – høyre (7-seter) (fjerne og skifte ut).
  8. Release the clips (x2) that attach the RH 2nd row seat backrest harness to the bottom side of the seat frame, disconnect the connector, and then remove the seat harness from the seat assembly.
    Informational PurposesAn informational icon, calling your attention
    Merk
    Remove the elastic harness holder to the release harness.
  9. Disconnect the RH 2nd row seat heater connector.
  10. Release the clip that attaches the RH 2nd row seat heater connector to the seat assembly.
  11. Release the fir tree clips (x2), and then release the shoulder switch harness from the harness guides (x5) on the upholstery support.
  12. Use a pry tool to release the shoulder switch connection from between the seatback and seat frame, and then remove the harness from the seat assembly.

Montere

  1. Use a pry tool to insert the shoulder switch connection between the seatback and seat frame, and then route the harness onto the seat assembly.
  2. Secure the fir tree clips (x2), and then secure the shoulder switch harness to the harness guides (x5) on the upholstery support.
  3. Install the clip that attaches the RH 2nd row seat heater connector to the seat assembly.
  4. Connect the RH 2nd row seat heater connector.
  5. Secure the clips (x2) that attach the RH 2nd row seat backrest harness to the bottom side of the seat frame, and then connect the connector.
    Informational PurposesAn informational icon, calling your attention
    Merk
    Install the plastic harness retainer.
  6. Install the RH 2nd row toe kick cover. See Deksel – gulvlist – sete på andre rad – høyre (7-seter) (fjerne og skifte ut).
  7. Install the RH 2nd row seat shoulder switch. See Skulderbryter – seterygg – andre rad – venstre (fjerne og skifte ut).
  8. Install the RH 2nd row seat back panel. See Ryggpanel – sete på andre rad – høyre (fjerne og skifte ut).
  9. Fold the RH 2nd row seat to the up position.
  10. Move the RH front seat to the original position.
  11. Raise the RH windows and close the RH doors.