06/02/2023 10:47:30

Støpedel – podium – sete på andre rad – venstre (7-seter) (fjerne og skifte ut)

Korrigeringskode 13020132 0.36 MERK: Hvis ikke noe annet er uttrykkelig oppgitt i prosedyren, gjenspeiler korrigeringskoden og FRT ovenfor alt arbeidet som kreves for å gjennomføre denne prosedyren, inkludert de tilknyttede prosedyrene. Ikke stable korrigeringskoder med mindre du bli uttrykkelig bedt om det.MERK: Se Flat rate-tider for å lære mer om FRT-er og hvordan de lages. Hvis du vil gi tilbakemelding om FRT-verdier, kan du sende en e-post til LaborTimeFeedback@tesla.com. MERK: Se Personlig beskyttelse for å forsikre deg om at du bruker riktig PVU når du gjennomfører prosedyren nedenfor.

Fjerne

  1. Remove the LH 2nd row seat assembly from the vehicle. See Sete – andre rad – venstre (7-seter) (fjerne og skifte ut).
  2. Remove the push clip from the front of the LH 2nd row seat outer sideshield assembly.
    Tips: Use a pick to remove the push clip from the bottom side of the outboard cover.
  3. Release the clip that attaches the LH 2nd row seat outer sideshield to the seat assembly, disconnect the electrical connector, and then remove the sideshield from the seat assembly.
    Informational PurposesAn informational icon, calling your attention
    Merk
    Release the outer sideshield assembly by pulling outwards and up at the front portion of the trim, and then releasing the remaining clip.
  4. Release the clips (x3) that attach the LH 2nd row seat inboard outer trim to the seat assembly, and then remove the trim from the seat assembly.
  5. Remove the seat pan fastener from the LH front of the LH 2nd row seat.
    6 Nm (4.4 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Merk
    1x fastener,10mm, 6Nm
    Tips: Bruk av følgende verktøy anbefales:
    • 10 mm socket
  6. Release the clips (x2) that attach the front of the LH 2nd row seat cushion to the seat assembly, and then lift the front edge of the seat cushion to access the podium fasteners.
  7. Remove and discard the bolts (x2) and release the harness clip that attach the LH 2nd row seat podium casting to the seat assembly, and then remove the casting from the seat assembly.
    37 Nm (27.3 lbs-ft)
    Tips: Bruk av følgende verktøy anbefales:
    • 11 mm socket

Montere

  1. Position the LH 2nd row seat podium casting into the seat assembly, and then secure the harness clip and install new bolts (x2) that attach the casting to the seat assembly.
    37 Nm (27.3 lbs-ft)
    Tips: Bruk av følgende verktøy anbefales:
    • 11 mm socket
  2. Position the front edge of the LH 2nd row seat cushion onto the seat assembly, and then install the clips that attach the cushion to the seat assembly.
  3. Install the seat pan fastener to the LH front of the LH 2nd row seat.
    6 Nm (4.4 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Merk
    1x fastener,10mm, 6Nm
    Tips: Bruk av følgende verktøy anbefales:
    • 10 mm socket
  4. Position the LH 2nd row seat outer sideshield to the seat assembly, connect the electrical connector, and then secure the clip that attaches the sideshield to the seat assembly.
  5. Install the push clip at the front of the LH 2nd row seat outer sideshield assembly.
  6. Position the LH 2nd row seat inboard outer trim onto the seat assembly, and then secure the clips (x3) that attach the trim to the seat assembly.
  7. Install the LH 2nd row seat assembly. See Sete – andre rad – venstre (7-seter) (fjerne og skifte ut).