24/05/2023 07:31:26

Ryggpanel – sete på andre rad – midten/20 (7-seter) (fjerne og skifte ut)

Korrigeringskode 13082332 MERK: Hvis ikke noe annet er uttrykkelig oppgitt i prosedyren, gjenspeiler korrigeringskoden og FRT ovenfor alt arbeidet som kreves for å gjennomføre denne prosedyren, inkludert de tilknyttede prosedyrene. Ikke stable korrigeringskoder med mindre du bli uttrykkelig bedt om det. MERK: Se Flat rate-tider for å lære mer om FRT-er og hvordan de lages. Hvis du vil gi tilbakemelding om FRT-verdier, kan du sende en e-post til LaborTimeFeedback@tesla.com. MERK: Se Personlig beskyttelse for å forsikre deg om at du bruker riktig PVU når du gjennomfører prosedyren nedenfor.

Fjerne

  1. Open the LH rear door and lower the LH rear window.
  2. Move the LH 2nd row seat back forward.
  3. Release the center 2nd row seat switch, disconnect the switch connector, and then remove the switch from the seat assembly.
    Tips: Use a plastic trim tool pry the top of the switch away from center seat back panel.
  4. Release the clips (x5) that attach the center 2nd row seat back panel to the center seat assembly, slide the panel forward to release the hooks (x2), and then remove the panel from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Merk
    Early production vehicles may have 4 hooks.

Montere

  1. Insert the center 2nd row seat back panel hooks (x2) into the center seat back assembly, and then slide the panel rearward into position.
    Informational PurposesAn informational icon, calling your attention
    Merk
    Early production vehicles may have 4 hooks.
  2. Secure the clips (x5) that attach the center 2nd row seat back panel to the center seat back assembly.
  3. Position the center 2nd row seat switch into the vehicle, connect the switch connector, and then install the switch into the seat assembly.
  4. Move the LH 2nd row seat back into the original position.
  5. Raise the LH rear window and close the LH front door.