2023-07-14

Light - Fog/Reverse - Rear - LH (Global) (Remove and Replace)

校正代码 17402712 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See 平均维修工时 to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 人员保护 to make sure proper PPE is worn when performing the below procedure.

Informational PurposesAn informational icon, calling your attention
注
This procedure is for the Global Refresh version of this part. The procedure for the Original version of this part is here: Light - Fog/Reverse - Rear - LH (Remove and Replace)。

拆卸

  1. 拆下掀背车门下部饰板总成。请参阅Trim - Liftgate - Lower (Remove and Replace)。
    Informational PurposesAn informational icon, calling your attention
    注
    无需将作业灯罩、作业灯或掀背车门开关从饰板总成上拆下。
  2. 松开将掀背车门 LH 尾灯侧盖固定到掀背车门的螺柱 (x2)，然后从掀背车门上拆下侧盖。
  3. 断开 LH 后雾灯/倒车灯电气连接器。
  4. 拆下将 LH 后雾灯/倒车灯固定到掀背车门的螺母 (x4)，然后从掀背车门上拆下车灯。
    4 Nm (2.9 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    推荐使用以下工具：
    • 8 毫米套筒

安装

  1. 将 LH 后雾灯/倒车灯放入掀背车门，然后安装将车灯固定到掀背车门的螺母 (x4)。
    4 Nm (2.9 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    推荐使用以下工具：
    • 8 毫米套筒
  2. 连接 LH 后雾灯/倒车灯电气连接器。
  3. 将掀背车门 LH 尾灯侧盖放到掀背车门上，然后紧固将侧盖固定到掀背车门的螺柱 (x2)。
    Informational PurposesAn informational icon, calling your attention
    注
    确保饰板正确安装到掀背车门总成上。
  4. 安装掀背车门下部饰板总成。请参阅Trim - Liftgate - Lower (Remove and Replace)。