2023-04-03

Trim - C-Pillar - Mid - LH (Remove and Replace)

校正代码 15185402 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See 平均维修工时 to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 人员保护 to make sure proper PPE is worn when performing the below procedure. 不适用

拆卸

  1. 拆下左侧和右侧承梁饰板。请参阅Bolster - Outer - Seat - 2nd Row - LH (Remove and Replace)
  2. 拆下第二排下部座垫。请参阅Seat Cushion - Lower - 2nd Row (Remove and Replace)
  3. 放倒第二排左侧座椅。
    Warning IconA warning icon, calling your attention to a possibly risky situation
    警告
    如果没有座垫,请按要求保护座椅。
  4. 拆下左侧 C 柱下部饰板。请参阅Trim - C-Pillar - Lower - LH (Remove and Replace)
  5. 松开将左侧 C 柱中部饰板固定到 C 柱的卡子(3 个),然后从车辆上拆下饰板。

安装

  1. 将左侧 C 柱中部饰板放置到左侧 C 柱上,然后紧固将饰板固定到车辆上的卡子(3 个)。
  2. 安装左侧 C 柱下部饰板。请参阅Trim - C-Pillar - Lower - LH (Remove and Replace)
  3. 扶起第二排左侧座椅靠背。
    Informational PurposesAn informational icon, calling your attention
    拆下座垫保护装置。
  4. 安装第二排座椅下部座垫。请参阅Seat Cushion - Lower - 2nd Row (Remove and Replace)
  5. 安装左侧和右侧承梁饰板。请参阅Bolster - Outer - Seat - 2nd Row - LH (Remove and Replace)