Pivot Bushing - Seat Back - 2nd Row - LH (Remove and Replace)
校正代码
13056702
0.18
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See 平均维修工时 to learn
more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 人员保护 to make sure proper PPE is worn when
performing the below
procedure.
拆卸
- 拆下第二排左侧座椅靠背。请参阅Seat Back - 2nd Row - LH (Remove and Replace)。
- 将第二排左侧座椅靠背总成反扣在有软垫保护的工作台上。
- 用油性记号笔标出枢轴部件的方向。
-
拆下将枢轴铸件固定在座椅总成上的 E 型夹。
警告请谨慎操作,避免人身伤害或对车辆内部造成损害。
- 从座椅总成上拆下枢轴铸件。
- 逆时针旋转第二排左侧座椅靠背枢轴套管,将其从第二排左侧枢轴静环中取下。
安装
- 在新的第二排左侧座椅靠背枢轴套管上做标记,使其与旧的枢轴套管方向一致。
- 将第二排左侧座椅靠背枢轴套管压到总成上,将其固定在第二排 H 枢轴静环上。
- 将枢轴铸件安装到座椅总成上。
-
安装将枢轴铸件固定到座椅总成上的 E 型夹。
警告请谨慎操作,避免人身伤害或对车辆内部造成损害。
- 安装第二排左侧座椅靠背。请参阅Seat Back - 2nd Row - LH (Remove and Replace)。