校正代码 13041132 0.18 注意：除非本程序中另有明确规定，否则上述校正代码和 FRT 反映的是执行本程序（包括关联程序）所需的所有工作。除非明确要求，否则请勿堆叠校正代码。 注意：请参阅平均维修工时，深入了解 FRT 及其创建方式。要提供有关 FRT 值的反馈，请发送电子邮件至LaborTimeFeedback@tesla.com。 注意：请参阅人员保护，确保在执行以下程序时穿戴适当的个人防护装备 (PPE)。

1. Open LH front door

   

2. Lower LH front window

   

3. Remove LH front décor assembly
   注

   2x Clips, 2x datums, Insert pry tool beneath clips on applique, one on each side of décor

   

   

   

   

4. Remove bolt securing LH front seatback panel to LH front seatback assembly
   注

   1x bolt, 10mm, 3 Nm

   

5. Move LH front seat upwards
   注

   Adjust seatback to avoid contact with headliner if needed

   

6. Move LH front seat forward

   

7. Open LH rear door

   

8. Release seatback elastic straps from seat frame
   注

   2x straps, Take note of routing and positioning, Determine location of clips and release straps, Use a mirror to aid if needed

   

   

   

   

9. Remove LH front seatback panel assembly
   注

   5x clips, 2x tabs, Recommend assistance, Start at the top of the seat and work downward, Slide tabs out from seatback frame

   

   

   

10. Install LH front seatback panel assembly
    注

    5x clips, 2x tabs Recommend assistance, Align and fully secure seatback cover onto seat frame assembly

    

    

    

11. Secure seatback elastic straps onto seat frame
    注

    2x straps, Return to original routing and location, Use a mirror to aid if needed

    

    

    

    

12. Move LH front seat downwards

    

13. Move LH front seat to original position

    

14. Install bolt securing LH front seatback panel to LH front seatback assembly
    注

    1x bolt, 10mm, 3 Nm

    

15. Install LH front decor assembly from LH front seat
    注

    2x Clips, 2x datums, Push décor assembly into seat frame, Replace damaged clips

    

    

16. Close LH rear door

    

17. Raise LH front window

    

18. Close LH front door
    注

    Close doors