2023-04-03

Carpet - Rear Trunk (5 Seat) (Remove and Replace)

校正代码 15245402 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See 平均维修工时 to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 人员保护 to make sure proper PPE is worn when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
警告
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.

拆卸

  1. 拆下后备箱行李架。请参阅Parcel Shelf - Rear Trunk (Remove and Replace)
  2. 拆下后行李箱负重底板。请参阅Trunk Load Floor - Rear (Remove and Replace)
  3. 拆下后行李箱饰板。请参阅Trim - Rear Trunk - Rear Wall (Remove and Replace)
  4. 拆下行李箱负重底板左侧支架。请参阅Bracket - Trunk Load Floor - LH (Remove and Replace)
  5. 拆下行李箱负重底板右侧支架。请参阅Bracket - Trunk Load Floor - RH (Remove and Replace)
  6. 拆下行李箱底板前饰板。请参阅Trim - Front - Floor - Trunk (Remove and Replace)
  7. 松开将后行李箱地毯固定到车辆的卡子(2 个)。

安装

  1. 紧固将后行李箱地毯固定到车辆的卡子(2 个)。
  2. 安装行李箱底板前饰板。请参阅Trim - Front - Floor - Trunk (Remove and Replace)
  3. 安装行李箱负重底板右侧支架。请参阅Bracket - Trunk Load Floor - RH (Remove and Replace)
  4. 拆下行李箱负重底板左侧支架。请参阅Bracket - Trunk Load Floor - LH (Remove and Replace)
  5. 安装后行李箱饰板。请参阅Trim - Rear Trunk - Rear Wall (Remove and Replace)
  6. 安装后行李箱负重底板。请参阅Trunk Load Floor - Rear (Remove and Replace)
  7. 安装后备箱行李架。请参阅Parcel Shelf - Rear Trunk (Remove and Replace)