2024-09-14

轮毂处置（返工）

校正代码 34015007 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 人员保护 to make sure wearing proper PPE when performing the below procedure.

Informational PurposesAn informational icon, calling your attention
注
执行此程序的目的是确认因任何原因而换下的轮毂不可重复使用。
Warning IconA warning icon, calling your attention to a possibly risky situation
警告
Wear appropriate personal protective equipment (PPE) including cut-resistant gloves and safety glasses when performing this procedure.

程序

  1. 将轮毂放置在工作台上，使气门嘴孔朝向你。
  2. 从气门嘴孔中心测量大约 3 厘米（1.2 英寸），然后用油性记号笔做一个标记。
  3. 使用 10 毫米钻头在标记位置钻一个孔。
  4. 在合适的废物处理点处置轮毂。