Light - License Plate (Remove and Replace)
校正代码
17402602
0.36
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See 平均维修工时 to learn
more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 人员保护 to make sure proper PPE is worn when
performing the below
procedure.
拆卸
- 拆下掀背车门饰板。请参阅Applique - Liftgate (Remove and Replace)。
- 拆下掀背车门下部饰板。请参阅Trim - Liftgate - Lower (Remove and Replace)。
- 拆下左侧和右侧倒车灯。请参阅Light - Fog/Reverse - Rear - LH (Remove and Replace)。
- 断开后车牌灯电气连接器。
- 松开将后车牌灯固定在车辆上的推拉式锁片。
安装
-
将后车牌灯安装到车辆上。
注安装掀背尾门前,确保泡沫放置在灯上。
- 连接后车牌灯电气连接器。
- 安装左侧和右侧倒车灯。请参阅Light - Fog/Reverse - Rear - LH (Remove and Replace)。
- 安装掀背尾门下部饰板。请参阅Trim - Liftgate - Lower (Remove and Replace)。
- 安装掀背尾门饰板。请参阅Applique - Liftgate (Remove and Replace)。