校正代码 12070302 0.12 注意：除非本程序中另有明确规定，否则上述校正代码和 FRT 反映的是执行本程序（包括关联程序）所需的所有工作。除非明确要求，否则请勿堆叠校正代码。 注意：请参阅平均维修工时，深入了解 FRT 及其创建方式。要提供有关 FRT 值的反馈，请发送电子邮件至LaborTimeFeedback@tesla.com。 注意：执行下述程序时，请参阅人员保护确认已穿戴适当的个人防护装备 (PPE)。

1. Remove front license plate with decorative frame from original fascia
   注

   4x Screws,T20, 3 Nm

   

   

2. Remove painted bracket from original fascia
   注

   3x Bolts, E10 5 Lobe, 1 Nm

   

   

3. Remove front license plate base bracket from original fascia
   注

   Secured by adhesive tape. Gently pry away from fascia

   

   

4. Clean any remaining adhesive from fascia

   

   

5. If not already present, install new adhesive strips on the new base bracket.

   

6. Position the painted bracket on the base bracket, and then install the bolts (x3) that attach the painted bracket to the base bracket.
   注

   3x Bolts, E10 5 Lobe, 1 Nm
   
7. Peel adhesive backing from new license plate bracket

   

8. Install license plate bracket to fascia
   注

   Align bracket with body lines, press bracket against fascia firmly to secure adhesive

   

   

9. Install license plate with decorative frame
   注

   4x Screws,T20, 3 Nm