2026-10-01

滑板 - 高压电池 - 前部（拆卸和更换）

校正代码 16102002 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See 人员保护 to make sure wearing proper PPE when performing the below procedure. NOTE: See 人体工程学注意事项 for safe and healthy working practices.

  • 2025-07-01: 添加了非电镀滑板的扭矩规格。

拆卸

  1. 拆卸前流线型护板。请参阅面板 - 流线型护板 - 前（拆卸和更换）。
  2. 拆下将滑板固定到电池的螺栓和夹子，然后从电池上拆下滑板。
    注
    存在两种不同的滑板，紧固件扭矩规格有所不同。
    黑色滑板（电镀）
    13 Nm (9.6 lbs-ft)
    银色滑板（非电镀）
    17 Nm (12.5 lbs-ft)

安装

安装程序与拆卸程序相反。