2026-08-09
饰板 - 后 - 下侧(拆卸和更换)
校正代码
10012902 0.72
NOTE: Unless otherwise explicitly
stated in the procedure, the correction code and its associated FRT reflect all of the
work required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created.
NOTE: See 人员保护 to make sure wearing proper PPE when
performing the below procedure. NOTE: See 人体工程学注意事项 for safe and healthy working
practices.
扭矩规格
| 描述 | 扭矩值 | 推荐工具 | 重复使用/更换 | 备注 |
|---|---|---|---|---|
| 将后饰板下部固定到后饰板上部的螺栓 |
![]() 3 Nm (2.2 lbs-ft) |
|
重复使用 |
拆卸
- 拆下后饰板扩散器。请参阅扩散器 - 后饰板(拆卸和更换)。
-
拆下将下部后饰板固定到上部后饰板的螺栓 (x2)。
3 Nm (2.2 lbs-ft)提示推荐使用以下工具- 10 毫米套筒扳手
-
松开将底部饰板固定到顶部饰板的夹子 (x10),然后分开两种饰板。
安装
安装程序与拆卸程序相反。