2019-06-26

Bezel - Handle - Seat Back - 2nd Row - LH (Remove and Replace)

校正代码 13055302 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 人员保护 to make sure wearing proper PPE when performing the below procedure.

拆卸

  1. 松开 LH 第二排座椅靠背,并稍微向前折叠。
  2. 使用撬具松开将 LH 第二排座椅靠背把手边框固定到 LH 第二排座椅靠背把手总成的夹子 (x2),然后从把手总成上拆下边框。

安装

  1. 将 LH 第二排座椅靠背把手边框装入 LH 第二排座椅靠背把手总成,然后紧固将边框固定到把手总成的夹子 (x2)。
  2. 展开 LH 第二排座椅靠背,使其处于垂直位置并固定。