2023-03-01

Service Panel - Instrument Panel (Remove and Replace)

校正代码 21051212 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 人员保护 to make sure wearing proper PPE when performing the below procedure.

拆卸

  1. Open the LH front door and lower the LH front window.
  2. Release the clips (x4) and tabs (x4) that attach the instrument panel service panel to the vehicle, and then disconnect the temperature sensor connector.
  3. Remove bolts (x2) that attach the cabin temperature sensor to instrument panel service panel, and then remove the sensor from the service panel.
    0.7 Nm (6 lbs-in)
    Informational PurposesAn informational icon, calling your attention
    TIp
    推荐使用以下工具:
    • 梅花 T20 批头

安装

  1. Position the cabin temperature sensor to instrument panel service panel, and then install the bolts (x2) that attach the sensor to the service panel.
    0.7 Nm (6 lbs-in)
    Informational PurposesAn informational icon, calling your attention
    TIp
    推荐使用以下工具:
    • 梅花 T20 批头
  2. Position the instrument panel service panel assembly to the instrument panel, connect the temperature sensor connector, and then secure the clips (x4) and tabs (x4) that attach the service panel to the vehicle.
  3. Raise the LH front window and close the LH front door.