2026-04-30
Suspension - Rear (Inspection)
校正代码 31030700314 注意：除非本程序中另有明确规定，否则上文所列校正代码和 FRT 反映的是执行本程序（包括关联程序）所需的所有工作。除非明确要求，否则请勿堆叠校正代码。 注意：请参阅平均维修工时深入了解 FRT 及其创建方式。 注意：请参阅人员保护确保在执行以下程序时穿戴适当的个人防护装备 (PPE)。 注意：请参阅人体工程学注意事项查看安全健康的作业规程。
- 2026-04-23: Released new procedure.
Inspection Summary
| Component | Inspection Description | Comment |
|---|---|---|
| Rear suspension links | Inspect for excessive play | See video Suspension Link Play (step 2) |
| Rear ball joints and bushings | Visually inspect all ball joints and bushings | See steps 6 and 7 |
| Rear bushings | Inspect for excessive movement | See steps 8 through 22 |
Inspection Details
- Remove the rear aero shield. See面板 - 流线型护板 - 后部（拆卸和更换） .
-
Remove the bolt and tabs (x2) that attach the LH rear suspension cover, and then remove the cover.
-
Remove the bolt and tabs (x2) that attach the RH rear suspension cover, and then remove the cover.
-
Inspect the LH rear stabilizer bar ball joints.
注Visually Inspect the ball joint for cracks, grease leakage, unseated boot, and/or boot puncture.
-
Inspect the RH rear stabilizer ball joints.
注Visually Inspect ball joints for cracks, grease leakage, unseated boot, and/or boot puncture
-
Inspect the LH rear toe link to subframe bushing.
注Examine the inner bushing of the LH toe link for unusual cracks. Use a pry bar to confirm that there is no excessive movement.
-
Inspect the LH rear toe link to knuckle bushing.
注Examine the outer bushing of the LH toe link for unusual cracks. Use a pry bar to confirm that there is no excessive movement.
-
Inspect the LH rear lower aft link to subframe bushing.
注Examine the inner bushing of the LH rear lower aft link for unusual cracks. Use a pry bar to confirm that there is no excessive movement. Inspect both sides of the bushing.
-
Inspect the LH rear lower aft link to knuckle bushing.
注Examine the outer bushing of the LH rear lower aft link for unusual cracks. Use a pry bar to confirm that there is no excessive movement. Examine both sides of the bushing.
-
Inspect the LH rear upper aft link to subframe bushing.
注Examine the inner bushing of the LH rear upper aft link for unusual cracks. Use a pry bar to confirm that there is no excessive movement. Examine both sides of the bushing.
-
Inspect the LH rear upper fore link.
注Examine the inner and outer bushing of the LH rear upper fore link for unusual cracks. Use a pry bar to confirm that there is no excessive movement. Examine both sides of the bushing.
-
Inspect the LH rear lower fore link.
注Examine the inner and outer bushing of the LH rear lower fore link for unusual cracks. Use a pry bar to confirm that there is no excessive movement. Examine both sides of the bushing.
-
Inspect the RH toe link to subframe bushing.
注Examine the inner bushing of the RH toe link for unusual cracks. Use a pry bar to confirm that there is no excessive movement. Examine both sides of the bushing.
-
Inspect the RH rear toe link to knuckle bushing.
注Examine the outer bushing of the RH toe link for unusual cracks. Use a pry bar to confirm that there is no excessive movement. Examine both sides of the bushing.
-
Inspect the RH rear lower aft link to subframe bushing.
注Examine the inner bushing of the RH rear lower aft link for unusual cracks. Use a pry bar to confirm that there is no excessive movement. Examine both sides of the bushing.
-
Inspect the RH rear lower aft link to knuckle bushing.
注Examine the outer bushing of the RH rear lower aft link for unusual cracks. Use a pry bar to confirm that there is no excessive movement. Examine both sides of the bushing.
-
Inspect the RH rear upper aft link to subframe bushing.
注Examine the inner bushing of the RH rear upper aft link for unusual cracks. Use a pry bar to confirm that there is no excessive movement. Examine both sides of the bushing.
-
Inspect the RH upper fore link.
注Examine the inner and outer bushing of the RH rear upper fore link for unusual cracks. Use a pry bar to confirm that there is no excessive movement. Examine both sides of the bushing.
-
Inspect the RH rear lower fore link.
注Examine the inner and outer bushing of the RH rear lower fore link for unusual cracks. Use a pry bar to confirm that there is no excessive movement. Examine both sides of the bushing.
-
Install the tabs (x2) and bolt that attach the RH rear suspension cover.
6 Nm (4.4 lbs-ft) -
Install the tabs (x2) and bolt that attach the LH rear suspension cover.6 Nm (4.4 lbs-ft)
- Install the rear aero shield. See 面板 - 流线型护板 - 后部（拆卸和更换） .
- Partially lower the vehicle.
-
Inspect the suspension link play on the RH and LH rear wheels.
注If excessive play is detected on the wheel, proceed to full upper knuckle play inspection (CC: 31030130, 31031812, 31031822).
Suspension Link Play