2026-08-09
密封件 - 玻璃滑槽 - 前车门 - 左侧(拆卸和更换)
校正代码
11701112 0.30
NOTE: Unless otherwise explicitly
stated in the procedure, the correction code and its associated FRT reflect all of the
work required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created.
NOTE: See 人员保护 to make sure wearing proper PPE when
performing the below procedure. NOTE: See 人体工程学注意事项 for safe and healthy working
practices.
拆卸
- 拆卸左前车门饰板。请参阅面板 - 车门饰板 - 前 - 左侧(拆卸和安装)。
- 从车门上拆下 LH 前门内侧密封条。请参阅密封件 - 内侧密封条 - 前车门 - 左侧(拆卸和更换)。
- 拆下左侧后视镜总成。请参阅后视镜 - 车门 - 左侧(拆卸和更换)。
-
向上拉起左前车门玻璃滑槽密封条,将其从左前车门上拆下。
安装
-
将新的左前车门玻璃滑槽密封条放置到左前车门上。
提示必要时,在密封条上涂敷少量 P80 润滑剂以便安装。
- 安装左侧后视镜总成。请参阅后视镜 - 车门 - 左侧(拆卸和更换)。
- 安装左前车门内侧密封条。请参阅密封件 - 内侧密封条 - 前车门 - 左侧(拆卸和更换)。
- 安装左前车门饰板。请参阅面板 - 车门饰板 - 前 - 左侧(拆卸和安装)