2026-08-09
热敏电阻 - 风管 - 上 - LH(带加热泵款)(拆卸和更换)
校正代码 18101102 0.48 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See 人员保护 to make sure wearing proper PPE when performing the below procedure. NOTE: See 人体工程学注意事项 for safe and healthy working practices.
拆卸
- 断开低压电源。请参阅12V/低压电源(断开和连接)。
- 拆下踏板总成。请参阅制动踏板(拆卸和更换)。
-
将电气线束与 LH 上管道热敏电阻断开。
-
使用撬具松开将热敏电阻固定到 HVAC 上管道的锁片 (x2),然后从车辆上拆下热敏电阻。
安装
-
将 LH 上管道热敏电阻放置在 HVAC 上管道上,确保安装锁片接合。
-
将电气线束连接到 LH 上管道热敏电阻。
- 安装为便于检修而拆下的所有组件。请参阅制动踏板(拆卸和更换)。