Seal - Trunk (Remove and Replace)
校正代码
11702002
0.18
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 人员保护 to make sure wearing proper PPE when
performing the below procedure.
拆卸
- 拆下后备箱门槛饰板。请参阅Trim - Sill - Trunk (Remove and Replace)。
- 从行李箱外缘松开行李箱密封条,然后从车身上拆下密封条。
安装
- 将后备箱密封条上的线与撞销对齐。
-
将后备箱密封条安装到后备箱外缘。
TIp用橡胶锤敲击,同时用塑料饰板工具按压,将后备箱密封条紧固安装到车身上。注确保将密封条底部塞入后饰板中。
- 安装后备箱门槛饰板。请参阅Trim - Sill - Trunk (Remove and Replace)。
- 拉拽行李箱密封条上的线,让其与内饰齐平。
- 安装后备箱底板。
- 关闭后备箱。