2026-08-09

软管 - 供给 - 动力总成(不带加热泵款)(拆卸和更换)

校正代码 18303302 3.60 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See 人员保护 to make sure wearing proper PPE when performing the below procedure. NOTE: See 人体工程学注意事项 for safe and healthy working practices.

拆卸

  1. 拆卸高压电池。请参阅高压电池 (RWD)(拆卸和安装)。
  2. 松开卡子,将动力总成供给软管接头从高压电池仓底部右侧断开。
  3. 松开将动力总成供给(上部)软管固定到高压电池右侧的卡子(5 个),然后从高压电池上拆下软管。
  4. 如果安装有动力总成供给软管塞,请将其拆下。

安装

安装程序与拆卸程序相反。