2026-07-31

Camera Cleaning System (Inspection)

교정 코드 62100100905 FRT 0.10 메모: 절차에서 명시적으로 언급하지 않는 한 위에 나열된 교정 코드 및 FRT는 연결된 절차를 포함하여 이 절차를 수행하는 데 필요한 모든 작업을 반영합니다. 명시적으로 지시하지 않는 한 교정 코드를 누적하지 마십시오. 참고: FRT와 그 생성 방법에 대한 자세한 내용은 표준 정비 작업시간의 내용을 참조하십시오. 메모: 아래 절차를 수행할 때 개인 보호의 내용을 참조하여 적절한 PPE를 착용했는지 확인하십시오. 참고: 안전하고 건강한 작업 사례는 인체공학적 주의 사항의 내용을 참조하십시오.

  • 2026-07-17: Released new procedure.
  1. ODIN 루틴 실행 TEST-SELF_VCLEFT_X_WIPERvia Service Mode:Closures ➜ Windows ➜ Wiper Testvia Toolbox:(link)
  2. On the vehicle touchscreen, select Service Mode > Driver Assist > Cameras > Grid Button (in lower corner of camera preview) > Clean Cameras. Verify that the camera cleaning system works as expected and that the air stream clears previously dispensed fluid. Record the results in SCA.
    Informational PurposesAn informational icon, calling your attention
    참고
    **Via Service mode>Driver Assist>Cameras>Grid button on lower left>Clean cameras, Ensure air stream clears previously dispensed fluid as expected, Record results in SCA
  3. Open the hood.
  4. Fill the washer fluid reservoir.
  5. Close the hood.