2026-04-30

2nd Row B-Cover Center Inner - 7-Seater (Remove and Replace)

교정 코드 1308020101 1308020102 메모: 절차에서 명시적으로 언급하지 않는 한 위에 나열된 교정 코드 및 FRT는 연결된 절차를 포함하여 이 절차를 수행하는 데 필요한 모든 작업을 반영합니다. 명시적으로 지시하지 않는 한 교정 코드를 누적하지 마십시오.참고: FRT와 그 생성 방법에 대한 자세한 내용은 표준 정비 작업시간의 내용을 참조하십시오. 메모: 아래 절차를 수행할 때 개인 보호의 내용을 참조하여 적절한 PPE를 착용했는지 확인하십시오. 참고: 안전하고 건강한 작업 사례는 인체공학적 주의 사항의 내용을 참조하십시오.

  • 2026-01-26: Released new procedure.

탈거

  1. Open all four doors.
  2. Move LH front seat forward.
    Informational PurposesAn informational icon, calling your attention
    참고
    Adjust seat back if needed to avoid contacting headliner.
  3. Lower all four windows.
  4. Move RH front seat forward.
    Informational PurposesAn informational icon, calling your attention
    참고
    Adjust seatback if needed to avoid contacting headliner.
  5. Fold 2nd row 60 seatback down.
  6. Remove center seatback headrest.
    Informational PurposesAn informational icon, calling your attention
    참고
    Simultaneously depress the guide button and insert a 90 degree pick into the guide opening, and lift up while engaged.
  7. Remove center backpanel from 2nd row center seatback.
    Informational PurposesAn informational icon, calling your attention
    참고
    Lift up at the lower 20 backpanel and then slide forward to release.
  8. Remove center seatback lumbar bun fastener.
    Informational PurposesAn informational icon, calling your attention
    참고
    1x screw, T20, 1.5 Nm
  9. Remove push clip from trim.
    Informational PurposesAn informational icon, calling your attention
    참고
    1x clip, Remove trim clip from cover

장착

  1. Install center inner cover.
    Informational PurposesAn informational icon, calling your attention
    참고
    Install inner cover ensuring the clips seat to outer cover.
  2. Install push clip to trim.
  3. Install center seatback lumbar bun.
    Informational PurposesAn informational icon, calling your attention
    참고
    Press seatback lumbar bun into center frame.
  4. Fold 2nd row 60 seatback down.
  5. Install center seatback lumbar bun fastener.
    Informational PurposesAn informational icon, calling your attention
    참고
    1x screw, T20, 1.5 Nm.
  6. Insert backpanel hooks (X2) into center seat back assembly.
    Informational PurposesAn informational icon, calling your attention
    참고
    Engage hooks and slide rearward into position, early production have 4x hooks.
  7. Install 2nd row center headrest.
  8. Return 2nd row 60 seatback to vertical position.
  9. Move RH front seat to original position.
  10. Move LH front seat to original position.
  11. Raise all four windows.
  12. Close all four doors
    Informational PurposesAn informational icon, calling your attention
    참고
    If LV is powered up then unlatch rear doors before closing.