2026-04-30

2nd Row Seat Harness- RH (7 Seater) (Remove and Replace)

교정 코드 1710080701 1710080702 메모: 절차에서 명시적으로 언급하지 않는 한 위에 나열된 교정 코드 및 FRT는 연결된 절차를 포함하여 이 절차를 수행하는 데 필요한 모든 작업을 반영합니다. 명시적으로 지시하지 않는 한 교정 코드를 누적하지 마십시오. 참고: FRT와 그 생성 방법에 대한 자세한 내용은 표준 정비 작업시간의 내용을 참조하십시오. 메모: 아래 절차를 수행할 때 개인 보호의 내용을 참조하여 적절한 PPE를 착용했는지 확인하십시오. 참고: 안전하고 건강한 작업 사례는 인체공학적 주의 사항의 내용을 참조하십시오.

  • 2026-01-26: Released new procedure.

탈거

  1. Open RH front door.
  2. Lower RH front window.
  3. Open RH rear door.
  4. Lower RH rear window.
  5. Move RH front seat forward.
  6. Fold 2nd row RH seatback down.
    Informational PurposesAn informational icon, calling your attention
    참고
    Protect seat back upholstery if necessary.
  7. Move RH seat forward using towel bar.
    Informational PurposesAn informational icon, calling your attention
    참고
    With one hand on towel bar pull up and slide the seat forward with your other hand.
  8. Remove 2nd row RH seat backpanel.
    Informational PurposesAn informational icon, calling your attention
    참고
    Lift up at the top left corner of RH pack panel to release clips and then slide forward to release hooks.
  9. Remove RH shoulder switch from RH seat assembly.
    Informational PurposesAn informational icon, calling your attention
    참고
    Using plastic trim tool pry the top of the switch away from 40 seat assembly to ease removal.
  10. Remove RH seat toe kick cover.
  11. Remove easy-entry switch.
  12. Remove RH seat back harness.
  13. Remove 2nd row seat RH seat harness from seat assembly.
    Informational PurposesAn informational icon, calling your attention
    참고
    Use a pry tool to release shoulder switch connection from between seatback and frame.

장착

  1. Route and install 2nd row seat RH seat harness onto seat assembly.
    Informational PurposesAn informational icon, calling your attention
    참고
    Use a pry tool to insert shoulder switch connection between seatback and frame.
  2. Install RH seat back harness.
    Informational PurposesAn informational icon, calling your attention
    참고
    Secure harness to harness guide.
  3. Install RH shoulder switch to RH seat assembly.
  4. Install RH seat toe kick cover.
  5. Install RH backpanel onto seat back.
    Informational PurposesAn informational icon, calling your attention
    참고
    Install back panel clips to seat back frame starting at lower back panel working your way up towards upper back panel.
  6. Move 2nd row RH seatback to vertical position.
  7. Move RH front seat to original position.
  8. Raise RH rear window.
  9. Close RH rear door.
  10. Raise RH front window.
  11. Close RH front door.