2025-09-11

Shell - Seat Back - 2nd Row - RH (Remove and Replace)

교정 코드 1308011902 FRT 0.42 바고: 절차에서 명시적으로 언급하지 않는 한 위 교정 코드 및 FRT는 연결된 절차를 포함하여 이 절차를 수행하는 데 필요한 모든 작업을 반영합니다. 명시적으로 지시하지 않는 한 교정 코드를 누적하지 마십시오. 참고: FRT와 그 생성 방법에 대한 자세한 내용은 표준 정비 작업시간을 참조하십시오. FRT 값에 대한 피드백을 제공하려면 ServiceManualFeedback@tesla.com으로 이메일을 보내십시오. 참고: 아래 절차를 수행할 때 개인 보호의 내용을 참조하여 적절한 PPE를 착용했는지 확인하십시오.참고: 안전하고 건강한 작업 사례는 인체공학적 주의 사항의 내용을 참조하십시오.

탈거

  1. Remove the 2nd row RH seat assembly. See 2nd Row Seat 5 Seater - RH (Remove and Install).
  2. Remove the 2nd row LH height adjuster guide. See 2nd Row Headrest Guide Lock - LH (Remove and Replace).
  3. Remove the 2nd row RH height adjuster guide. See 2nd Row Height Adjuster Guide - RH (Remove and Replace).
  4. Remove clips securing 2nd row 40 seatback substrate to frame.
  5. Disconnect 2nd row 40 seat backrest adjustment motor connector.
  6. Release 2nd row 40 seat backrest adjustment motor harness from substrate.
  7. Remove clip securing 2nd row 40 seat position sensor connector.
  8. Disconnect 2nd row 40 seat position sensor connector.
  9. Remove 2nd row 40 seat substrate from frame.
    Informational PurposesAn informational icon, calling your attention
    참고
    3x hooks, 1x tab, Push tab forward, and Lift up and unhook from seat railing.
  10. Remove 2nd row 40 seatback harness from shell and pull the assembly from rail.
  11. Release RH seat back assembly trim flaps from RH seat back shell.
  12. Remove 40 seat back heat pad harness from RH seat back shell
  13. Remove RH seat back shell from foam trim assembly.

장착

  1. Install RH seat back shell to foam trim assembly.
  2. Install 40 seat back heat pad harness to RH seat back shell
  3. Connect RH seat back assembly trim flaps to RH seat back shell.
  4. Routine 2nd row 40 seatback harness to shell and insert assembly into rail.
  5. Install 2nd row 40 seat substrate to frame.
  6. Connect 2nd row 40 seat position sensor connector.
  7. Install clip securing 2nd row 40 seat position sensor connector.
  8. Install 2nd row 40 seat backrest adjustment motor harness onto substrate.
  9. Connect 2nd row 40 seat backrest adjustment motor connector.
  10. Install clips securing 2nd row 40 seatback substrate to frame.
  11. Install the 2nd row LH height adjuster guide. See 2nd Row Headrest Guide Lock - LH (Remove and Replace).
  12. Install the 2nd row RH height adjuster guide. See 2nd Row Height Adjuster Guide - RH (Remove and Replace).
  13. Install the 2nd row RH seat assembly. See 2nd Row Seat 5 Seater - RH (Remove and Install).