2025-03-18

Hoses - Battery Return Tube (Remove and Replace)

교정 코드 1830021702 FRT 3.24 바고: 절차에서 명시적으로 언급하지 않는 한 위 교정 코드 및 FRT는 연결된 절차를 포함하여 이 절차를 수행하는 데 필요한 모든 작업을 반영합니다. 명시적으로 지시하지 않는 한 교정 코드를 누적하지 마십시오. 참고: FRT와 그 생성 방법에 대한 자세한 내용은 표준 정비 작업시간을 참조하십시오. FRT 값에 대한 피드백을 제공하려면 ServiceManualFeedback@tesla.com으로 이메일을 보내십시오. 참고: 아래 절차를 수행할 때 개인 보호의 내용을 참조하여 적절한 PPE를 착용했는지 확인하십시오.참고: 안전하고 건강한 작업 사례는 인체공학적 주의 사항의 내용을 참조하십시오.

탈거

  1. Remove penthouse engagement seal from HV battery pack. See 보조 베이 체결 씰.
  2. Disconnect RH coolant hose from rear of HV battery.
  3. Release clips securing HV battery return tube from rear of HV battery.
  4. Release HV battery return tube from LH side of HV battery and allow hose to fully drain.

장착

  1. Install HV battery return tube onto LH side of HV battery.
  2. Install clips securing HV battery return tube to rear of HV battery.
  3. Connect RH coolant hose to rear of HV battery.
  4. Install penthouse engagement seal to HV battery pack. See 보조 베이 체결 씰.