校正代码 15190405500 0.06 注意：除非本程序中另有明确规定，否则上文所列校正代码及相关 FRT 反映的是执行本程序（包括关联程序）所需的所有工作。除非明确要求，否则请勿堆叠校正代码。 注意：请参阅平均维修工时深入了解 FRT 及其创建方式。 注意：请参阅人员保护确保在执行以下程序时穿戴适当的个人防护装备 (PPE)。 注意：请参阅人体工程学注意事项查看安全健康的作业规程。

1. Open both front doors
2. Inspect center console sliding lid
   注

   Check sliding lid functionality, press in to see if it closes and clears cup holder

   

   

3. If the sliding lid will not fully close, secure the cup holder
   注

   6x clips, press down on the 6 points shown in the first image; the 6 clips are on the underside of the cupholder assembly, where indicated by the yellow arrows. To assure cup holder is fully seated check for gaps and do a wiggle test

   

   

   

4. Verify sliding lid is functional
   注

   Check sliding lid functionality, press in to see if it closes and clears cup holder. If sliding lid is stuck in the open position recommend replacing center console sliding door assembly

   

   

   

5. Close both front doors