2023-12-10

制动踏板导销 ((拆卸和更换))

校正代码 3325010212 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 人员保护 to make sure wearing proper PPE when performing the below procedure.

拆卸

  1. 拆卸驾驶位脚部空间盖板。请参阅驾驶位脚部空间盖板总成 ((拆卸和更换))
  2. 拆卸左侧脚部空间风管。请参阅驾驶位脚部空间风管 ((拆卸和更换))
  3. 松开将制动器 U 型夹固定销固定到踏板总成的开口销。
    Informational PurposesAn informational icon, calling your attention
    手动拆卸开口销。
  4. 将制动器 U 型夹固定销从制动踏板总成上拆下,然后将 U 型夹从踏板上松开。
    Informational PurposesAn informational icon, calling your attention
    摆动制动踏板以辅助拆下固定销。

安装

  1. 对齐制动踏板与制动助力器杆,然后安装将 U 型夹固定到制动踏板总成上的制动器 U 型夹固定销。
    Warning IconA warning icon, calling your attention to a possibly risky situation
    警告
    The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
  2. 安装将制动器 U 型夹固定销固定到踏板总成的开口销。
    Informational PurposesAn informational icon, calling your attention
    将所有零件移回原位。如果开口销发生损坏,请进行更换。
  3. 安装左侧脚部空间风管。请参阅驾驶位脚部空间风管 ((拆卸和更换))
  4. 安装驾驶位脚部空间盖板。请参阅驾驶位脚部空间盖板总成 ((拆卸和更换))