02/07/2024 00:54:32

Wheel Trim - Performance (Remove and Install)

校正代码 3401000101 FRT 0.12 注意：除非本程序中另有明确规定，否则上述校正代码和 FRT 反映的是执行本程序（包括关联程序）所需的所有工作。除非明确要求，否则请勿堆叠校正代码。 注意：请参阅平均维修工时，深入了解 FRT 及其创建方式。要提供有关 FRT 值的反馈，请发送电子邮件至LaborTimeFeedback@tesla.com。 注意：请参阅人员保护，确保在执行以下程序时穿戴适当的个人防护装备 (PPE)。

拆卸

  1. Lay wheel assembly face down onto padded surface to gain access to the backside.
  2. Remove wishbone aero wheel inserts.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use a hammer and punch to carefully release each outboard clip securing wishbone aero insert onto wheel, push insert downwards to remove wishbone aero insert from wheel assembly.

安装

  1. Install wishbone aero wheel inserts.
    Informational PurposesAn informational icon, calling your attention
    Note
    Follow install press sequence for each wishbone aero insert, align wishbone aero insert into inboard of wheel and push insert in clockwise motion to snap into place, ensure all the clips are fully engaged and secured onto wheel assembly.