28/09/2023 10:55:54

饰板总成 - 后 - 下(拆卸和更换)

校正代码 10012902 0.78 注意:除非本程序中另有明确规定,否则上述校正代码和 FRT 反映的是执行本程序(包括关联程序)所需的所有工作。除非明确要求,否则请勿堆叠校正代码。 注意:请参阅平均维修工时,深入了解 FRT 及其创建方式。要提供有关 FRT 值的反馈,请发送电子邮件至LaborTimeFeedback@tesla.com 注意:执行下述程序时,请参阅人员保护确认已穿戴适当的个人防护装备 (PPE)。

拆卸

  1. Remove the rear fascia assembly from the vehicle. See 饰板总成 - 后(拆卸和安装).
  2. Release the park assist harness from the rear lower fascia.
  3. Remove the screws (x4) that attach the upper rear fascia assembly to the lower rear fascia assembly.
    5 Nm (3.7 lbs-ft)
    提示: 推荐使用以下工具:
    • 10 毫米套筒
  4. Release the tabs (x21) that attach the upper rear fascia assembly to the lower rear fascia assembly, and then remove the upper assembly from the lower assembly.
  5. Remove the trailer hitch cover. See 盖板 - 拖车挂钩(拆卸和更换).
  6. Remove the bolts (x6) that attach the lower rear fascia to the rear diffuser.
    5 Nm (3.7 lbs-ft)
    提示: 推荐使用以下工具:
    • 10 毫米套筒
  7. Release the tabs (x8) that attach the lower rear fascia to the rear diffuser.
  8. Remove the LH and RH rear reflex lamps. See 灯 - 反射 - 后 - LH(拆卸和更换).

安装

  1. Install the LH and RH rear reflex lamps. See 灯 - 反射 - 后 - LH(拆卸和更换).
  2. Position the lower rear fascia to the rear diffuser, and then secure the tabs (x8).
  3. Install the bolts (x6) that attach the lower rear fascia to the rear diffuser.
    5 Nm (3.7 lbs-ft)
    提示: 推荐使用以下工具:
    • 10 毫米套筒
  4. Remove the trailer hitch cover. See 盖板 - 拖车挂钩(拆卸和更换).
  5. Position the upper rear fascia assembly onto the lower rear fascia assembly, and then secure the tabs (x21) that attach the upper assembly to the lower assembly.
  6. Install the screws (x4) that attach the upper rear fascia assembly to the lower rear fascia assembly.
    5 Nm (3.7 lbs-ft)
    提示: 推荐使用以下工具:
    • 10 毫米套筒
  7. Install the clip that attaches the park assist harness to the rear lower fascia.
  8. Install the rear fascia onto the vehicle. See 饰板总成 - 后(拆卸和安装).