03/04/2023 14:23:58
雨刮器臂 - RH（拆卸和更换）
校正代码
17500352 0.05
注意：除非本程序中另有明确规定，否则上述校正代码和 FRT 反映的是执行本程序（包括关联程序）所需的所有工作。除非明确要求，否则请勿堆叠校正代码。
注意：请参阅平均维修工时，深入了解 FRT 及其创建方式。要提供有关 FRT 值的反馈，请发送电子邮件至LaborTimeFeedback@tesla.com。
注意：执行下述程序时，请参阅人员保护确认已穿戴适当的个人防护装备 (PPE)。
拆卸
- Open the LH front door and lower the LH front window.
- Remove the rear underhood apron. See 前备箱挡板 - 后部（拆卸和更换）.
-
Release the RH wiper arm hose
nozzle.
-
Remove the RH wiper arm nut covers
(x2).
-
Remove the nuts (x2) that attach the
RH wiper arm to the vehicle, and then use a wiper arm removal tool to remove the wiper
arm from the vehicle.
32 Nm (23.6 lbs-ft)警告Do not flex the wiper arm to remove it.注Lower the hood slightly to fit the wiper arm removal tool.TIp推荐使用以下工具：- 15 毫米套筒
- Wiper Arm Removal Tool - 1058696-00-A
安装
-
Position the RH wiper arm into the
vehicle, and then install the nuts (x2) that attach the wiper arm to the vehicle.32 Nm (23.6 lbs-ft)注Line up the wiper to the reference mark on the windshield.TIp推荐使用以下工具：
- 15 毫米套筒
-
Install the RH wiper arm nut covers (x2).
-
Secure the RH wiper arm hose nozzle.
注Make sure the hose is routed below the arm pivot.
- Install the rear underhood apron. See 前备箱挡板 - 后部（拆卸和更换）.
- Raise the LH front window and close the LH front door.