06/02/2024 00:23:32
Passenger Ducting And Vents -2nd Row Floor Duct, RH (Remove and Replace)
교정 코드 1810020012 FRT 0.42 참고: 절차에서 명시적으로 언급하지 않는 한 위 교정 코드 및 FRT는 연결된 절차를 포함하여 이 절차를 수행하는 데 필요한 모든 작업을 반영합니다. 명시적으로 지시하지 않는 한 교정 코드를 누적하지 마십시오. 참고: FRT와 그 생성 방법에 대한 자세한 내용은 표준 정비 작업시간을 참조하십시오. FRT 값에 대한 피드백을 제공하려면 LaborTimeFeedback@tesla.com으로 이메일을 보내십시오. 참고: 아래 절차를 수행할 때 개인 보호을(를) 참조하여 적절한 PPE를 착용했는지 확인하십시오.
탈거
- 모든 도어를 열고 창문을 모두 내립니다.
- 센터 콘솔 후면 엔드 패널을 탈거합니다. 참조 항목: Center Console - Console Rear End Panel, Assembly (Remove and Replace).
- RH 계기판 엔드캡을 탈거합니다. 참조 항목: Dash Panel -End Cap, LH (Remove and Replace).
- RH 하단 A필러 어셈블리를 탈거합니다. 참조 항목: A - B - C Post Interior Trim - A - Pillar Lower Assembly, LH (Remove and Replace).
- RH 전면 시트 어셈블리를 탈거합니다. 참조 항목: Front Seat Assemblies -1st Row Seat Assembly, RH, No Lumbar (Remove and Replace).
- RH 전면 발밑 공간 커버를 탈거합니다. 참조 항목: Dash Panel - Passenger Footwell Cover Assembly (Remove and Replace).
- RH 센터 콘솔 전면 사이드 패널을 탈거합니다. 참조 항목: Center Console -Console Side Panel, Carpet, RH, LHD (Remove and Replace).
- RH 센터 콘솔 후면 사이드 패널을 탈거합니다. 참조 항목: Center Console - Rear Side Panel, LH, Assembly (Remove and Replace).
- RH 전면 카펫을 탈거합니다. 참조 항목: Passenger Compartment Carpet -Main Cabin Carpet RH (Remove and Replace).
- 메인 덕트에서 RH 2열 플로어 덕트를 탈거한 다음 차량에서 탈거합니다.
장착
- RH 2열 플로어 덕트를 메인 덕트에 장착합니다.
- RH 전면 카펫을 장착합니다. 참조 항목: Passenger Compartment Carpet -Main Cabin Carpet RH (Remove and Replace).
- RH 센터 콘솔 후면 사이드 패널을 장착합니다. 참조 항목: Center Console - Rear Side Panel, LH, Assembly (Remove and Replace).
- RH 센터 콘솔 전면 사이드 패널을 장착합니다. 참조 항목: Center Console -Console Side Panel, Carpet, RH, LHD (Remove and Replace).
- RH 전면 발밑 공간 커버를 장착합니다. 참조 항목: Dash Panel - Passenger Footwell Cover Assembly (Remove and Replace).
- RH 전면 시트 어셈블리를 장착합니다. 참조 항목: Front Seat Assemblies -1st Row Seat Assembly, RH, No Lumbar (Remove and Replace).
- RH 하단 A필러 어셈블리를 장착합니다. 참조 항목: A - B - C Post Interior Trim - A - Pillar Lower Assembly, LH (Remove and Replace).
- RH 계기판 엔드캡을 장착합니다. 참조 항목: Dash Panel -End Cap, LH (Remove and Replace).
- 센터 콘솔 후면 엔드 패널을 장착합니다. 참조 항목: Center Console - Console Rear End Panel, Assembly (Remove and Replace).
- 모든 창문을 올리고 도어를 모두 닫습니다.