2026-07-02

Basic Vehicle Inspection (Inspection)

교정 코드 00030700 FRT 0.90 메모: 절차에서 명시적으로 언급하지 않는 한 위에 나열된 교정 코드 및 FRT는 연결된 절차를 포함하여 이 절차를 수행하는 데 필요한 모든 작업을 반영합니다. 명시적으로 지시하지 않는 한 교정 코드를 누적하지 마십시오. 참고: FRT와 그 생성 방법에 대한 자세한 내용은 표준 정비 작업시간의 내용을 참조하십시오. 메모: 아래 절차를 수행할 때 개인 보호의 내용을 참조하여 적절한 PPE를 착용했는지 확인하십시오. 참고: 안전하고 건강한 작업 사례는 인체공학적 주의 사항의 내용을 참조하십시오.

Warning IconA warning icon, calling your attention to a possibly risky situation
경고
이 절차는 초안입니다. 따라서 검증은 되었지만 경고 및 주의 사항이 누락되었을 수 있습니다. 고전압 시스템 및 구성 요소에서 또는 그 근처에서 작업하는 경우에는 안전 요구 사항을 준수하고 최고 수준의 주의를 기울여야 합니다.
  • 2026-06-18: Released new procedure.

Procedure

  1. Function check LH front door (exterior)
    Informational PurposesAn informational icon, calling your attention
    참고
    Inspect and note functionality for the door handle operation and full range of motion of the door, From outside look for interference with brightwork and door to body, Note noises such as creaks, groans and clicks, pauses or incomplete actions
  2. Function check LH front door (interior)
    Informational PurposesAn informational icon, calling your attention
    참고
    Inspect and note functionality for the interior door release, puddle lamps, and manual release cable, From inside look for interference with other components, noises such as creaks, groans and clicks, pauses or incomplete actions
  3. Function check all windows from master switch
    Informational PurposesAn informational icon, calling your attention
    참고
    Document any abnormal operation/noises
  4. Function check wipers and spray jets
    Informational PurposesAn informational icon, calling your attention
    참고
    Ensure hood and doors are closed prior to activating wipers, Inspect and note functionality for wipers and wiper jets, Check for full range of motion, speed of motion, interference with other components, noises such as creaks, groans and clicks, pauses or incomplete actions
  5. Function check all driver controls
    Informational PurposesAn informational icon, calling your attention
    참고
    Shift stalk, turn signals, steering wheel scroll wheels, horns
  6. Function check steering column through UI
    Informational PurposesAn informational icon, calling your attention
    참고
    Move the column to its extreme position in each direction using steering wheel buttons, Return to original position
  7. Function check the exterior lights
    Informational PurposesAn informational icon, calling your attention
    참고
    Recommend assistance, inspect and note functionality of Headlight (LH and RH), Side Repeater (LH and RH), Taillight (LH and RH), CHMSL, Fog Light (LH and RH), Reverse Light (LH and RH), Front Turn Signal (LH and RH), Rear Turn Signal (LH and RH)
  8. Function check hazard light switch
  9. Function check LH rear door (exterior)
    Informational PurposesAn informational icon, calling your attention
    참고
    Inspect and note functionality for the door handle operation and full range of motion of the door, From outside look for interference with brightwork and door to body, Note noises such as creaks, groans and clicks, pauses or incomplete actions
  10. Function check RH rear door (exterior)
    Informational PurposesAn informational icon, calling your attention
    참고
    Inspect and note functionality for the door handle operation and full range of motion of the door, From outside look for interference with brightwork and door to body, Note noises such as creaks, groans and clicks, pauses or incomplete actions
  11. Function check RH front door (exterior)
    Informational PurposesAn informational icon, calling your attention
    참고
    Inspect and note functionality for the door handle operation and full range of motion of the door, From outside look for interference with brightwork and door to body, Note noises such as creaks, groans and clicks, pauses or incomplete actions
  12. Open hood
  13. Remove rear apron
    Informational PurposesAn informational icon, calling your attention
    참고
    14x clips
  14. Remove fresh air gutter assembly
    Informational PurposesAn informational icon, calling your attention
    참고
    3x clips
  15. Check coolant level in reservoir
  16. Check brake fluid level
  17. Fill washer reservoir with fluid
  18. Install fresh air gutter assembly
    Informational PurposesAn informational icon, calling your attention
    참고
    3x clips
  19. Install rear apron
    Informational PurposesAn informational icon, calling your attention
    참고
    14x clips, Hold rear wall of frunk to keep from flexing while engaging front clips
  20. Close hood
  21. Raise and support vehicle
    Informational PurposesAn informational icon, calling your attention
    참고
    remove charging equipment
  22. Raise vehicle partially and lower lift onto locks
    Informational PurposesAn informational icon, calling your attention
    참고
    Set vehicle to comfortable working height, Make sure there's an audible click of the locks on both sides before lowering, Otherwise vehicle may tilt to the side
  23. Check all four tire pressures manually
    Informational PurposesAn informational icon, calling your attention
    참고
    4x tires, 4x caps, Set to specification if necessary, Refer to the "Tire and Loading Information" label located on the driver side B-pillar, Inspect wheels and tires for any bulges or damage while checking/setting pressures
  24. Record tread depth for LH front tire
    Informational PurposesAn informational icon, calling your attention
    참고
    Measure and record the outer, center, and inner tread depths, Measure the circumferential tire grooves only, Do not place the tire tread gauge probe on the molded treadwear indicators, Recommend replacement if tread depth is 4/32in (3mm) or less
  25. Record tread depth for RH front tire
    Informational PurposesAn informational icon, calling your attention
    참고
    Measure and record the outer, center, and inner tread depths, Measure the circumferential tire grooves only, Do not place the tire tread gauge probe on the molded treadwear indicators, Recommend replacement if tread depth is 4/32in (3mm) or less
  26. Record tread depth for LH rear tire
    Informational PurposesAn informational icon, calling your attention
    참고
    Measure and record the outer, center, and inner tread depths, Measure the circumferential tire grooves only, Do not place the tire tread gauge probe on the molded treadwear indicators, Recommend replacement if tread depth is 4/32in (3mm) or less
  27. Record tread depth for RH rear tire
    Informational PurposesAn informational icon, calling your attention
    참고
    Measure and record the outer, center, and inner tread depths, Measure the circumferential tire grooves only, Do not place the tire tread gauge probe on the molded treadwear indicators, Recommend replacement if tread depth is 4/32in (3mm) or less
  28. Measure and record LH rear brake pad thickness
    Informational PurposesAn informational icon, calling your attention
    참고
    Recommend replacement if 2mm or less, Check both inboard and outboard pads
  29. Inspect LH rear brake rotor condition
    Informational PurposesAn informational icon, calling your attention
    참고
    Check for excessive rust or wear, Minimum spec 26mm
  30. Measure and record RH rear brake pad thickness
    Informational PurposesAn informational icon, calling your attention
    참고
    Recommend replacement if 2 mm or less, Check both inboard and outboard pads
  31. Inspect RH rear brake rotor condition
    Informational PurposesAn informational icon, calling your attention
    참고
    Check for excessive rust or wear, Minimum spec 26mm
  32. Measure and record RH front brake pad thickness
    Informational PurposesAn informational icon, calling your attention
    참고
    Recommend replacement if 2mm or less, Check both inboard and outboard pads
  33. Inspect RH front brake rotor condition
    Informational PurposesAn informational icon, calling your attention
    참고
    Check for excessive rust or wear, Minimum spec 30mm
  34. Measure and record LH front brake pad thickness
    Informational PurposesAn informational icon, calling your attention
    참고
    Recommend replacement if 2mm or less, Check both inboard and outboard pads
  35. Inspect LH front brake rotor condition
    Informational PurposesAn informational icon, calling your attention
    참고
    Check for excessive rust or wear, Minimum spec 30mm
  36. Raise vehicle fully and lower lift onto locks
    Informational PurposesAn informational icon, calling your attention
    참고
    Set vehicle to comfortable working height, Ensure an audible click of locks on both sides is heard before lowering, Vehicle may tilt to the side if both locks are not engaged
  37. Remove bolts securing front aero shield
    Informational PurposesAn informational icon, calling your attention
    참고
    7x bolts, 10mm, 5 Nm
  38. Remove front aero shield from studs
    Informational PurposesAn informational icon, calling your attention
    참고
    2x nuts, 15mm, 8 Nm
  39. Remove rear aero shield clips
    Informational PurposesAn informational icon, calling your attention
    참고
    2x clips, One clip on LH side wheel liner, One clip on RH side wheel liner
  40. Remove rear aero shield
    Informational PurposesAn informational icon, calling your attention
    참고
    11x bolts, 10mm, 5 Nm
  41. Remove LH rear suspension cover
    Informational PurposesAn informational icon, calling your attention
    참고
    1x bolt, 10mm, 6 Nm, 2x tabs
  42. Remove RH rear suspension cover
    Informational PurposesAn informational icon, calling your attention
    참고
    1x bolt, 10mm, 6 Nm, 2x tabs
  43. Perform visual inspection of HV battery enclosure
    Informational PurposesAn informational icon, calling your attention
    참고
    Check for any dents, scrapes, or other damage
  44. Inspect underside of vehicle for fluid leaks
  45. Perform inspection of steering components
    Informational PurposesAn informational icon, calling your attention
    참고
    Check steering gear joints, fasteners, and electrical connections, Verify components are not bent or damaged
  46. Perform inspection of front suspension components
    Informational PurposesAn informational icon, calling your attention
    참고
    Check conditions of ball joints and bushings, etc, Inspect for any loose fasteners, Carefully apply pressure with a pry bar as needed
  47. Perform inspection of rear suspension components
    Informational PurposesAn informational icon, calling your attention
    참고
    Check conditions of ball joints and bushings, etc, Inspect for any loose fasteners, Carefully apply pressure with a pry bar as needed
  48. Install RH rear suspension cover
    Informational PurposesAn informational icon, calling your attention
    참고
    1x bolt, 10mm, 6 Nm, 2x tabs
  49. Install LH rear suspension cover
    Informational PurposesAn informational icon, calling your attention
    참고
    1x bolt, 10mm, 6 Nm, 2x tabs
  50. Install rear aero shield
    Informational PurposesAn informational icon, calling your attention
    참고
    11x bolts, 10mm, 5 Nm, Apply Loctite 222 onto rear aero shield bolts before installing
  51. Install rear aero shield
    Informational PurposesAn informational icon, calling your attention
    참고
    2x clips, One clip on LH side wheel liner, One clip on RH side wheel liner
  52. Position front aero shield onto vehicle and secure with two nuts
    Informational PurposesAn informational icon, calling your attention
    참고
    2x nuts, 15mm, 8 Nm, Hand-tighten the nuts to temporarily hold the panel in place
  53. Install front aero shield bolts
    Informational PurposesAn informational icon, calling your attention
    참고
    7x bolts, 10mm, 5 Nm, Apply Loctite 222 onto bolts before installing
  54. Lower vehicle until tires are touching ground
    Informational PurposesAn informational icon, calling your attention
    참고
    Raise lift off locks, then hold lock release lever to keep locks free while vehicle is lowered
  55. Raise all four windows
  56. Close all four doors
  57. Perform a road test using a series of ABS-active stops and ensure proper brake pedal feel and performance
    Informational PurposesAn informational icon, calling your attention
    참고
    The vehicle must stop completely within 25 feet (7.6 meters) at 20 mph (32 kph), Confirm that no excessive vibration or noise is present
  58. Inspect vehicles alignment
    Informational PurposesAn informational icon, calling your attention
    참고
    Confirm steering wheel is straight and no vibrations or noises are felt or heard from the suspension, On a flat road, at 35 mph (56 kph), the vehicle does not pull in either direction