09/10/2024 00:32:01

Event Data Recorder Retrieval

Warning IconA warning icon, calling your attention to a possibly risky situation
경고
이 절차는 검증되었지만 초안입니다. 경고와 주의사항이 누락되었을 수 있습니다. 고전압 시스템 및 구성 요소에서 또는 그 근처에서 작업하는 경우에는 안전 요구 사항을 준수하고 최고 수준의 주의를 기울여야 합니다. 수정 사항 및 기타 의견이 있으면 ServiceDevelopment@teslamotors.com으로 알려 주십시오.
Informational PurposesAn informational icon, calling your attention
참고
Refer to CD-24-20-002 for 2024+ Model 3 Event Data Recorder (EDR) guide.
Informational PurposesAn informational icon, calling your attention
참고
Use the following procedure(s) for 2024+ Model 3 EDR retrieval as required:

Establish an In-Vehicle Connection (OBD2 Port)

  1. Open the LH front door.
  2. Lower the LH front window.
  3. Connect the OBD2 diagnostics cable to the PCAN-USB adapter.
    팁: 다음 공구 사용을 권장합니다.
    • OBD2 Diagnostics Cable - 2077826-00-A
    • PCAN-USB Adapter - 1016990-00-A
  4. Connect the OBD2 diagnostics cable to the vehicle's OBD2 port.
  5. Connect the PCAN-USB adapter to the laptop USB port.
  6. Open the Tesla EDR Retrieval Program. The program automatically attempts to connect to the RCM.
    Informational PurposesAn informational icon, calling your attention
    참고
    When connected properly, a green circle and the message “Connected to RCM” displays on the bottom left corner of the window.
  7. Once connected to the EDR, click “Run EDR Retrieval” and follow the on-screen prompts to retrieve and save EDR data.
  8. The retrieved *.edr data file can be used to generate a Tesla EDR Report at https://edr.tesla.com.
  9. Close the Tesla EDR Retrieval Program.
  10. Disconnect the PCAN-USB adapter from the laptop USB port.
  11. Disconnect the OBD2 diagnostics cable from the vehicle's OBD2 port.
  12. Disconnect the OBD2 diagnostics cable from the PCAN-USB adapter.
  13. Raise the LH front window.
  14. Close the LH front door.