2025-10-08

Pump - Washer - Windshield (Remove and Install)

교정 코드 1750020311 0.12 메모: 절차에서 명시적으로 언급하지 않는 한 위에 나열된 교정 코드 및 FRT는 연결된 절차를 포함하여 이 절차를 수행하는 데 필요한 모든 작업을 반영합니다. 명시적으로 지시하지 않는 한 교정 코드를 누적하지 마십시오. 참고: FRT와 그 생성 방법에 대한 자세한 내용은 표준 정비 작업시간의 내용을 참조하십시오. 메모: 아래 절차를 수행할 때 개인 보호의 내용을 참조하여 적절한 PPE를 착용했는지 확인하십시오. 참고: 안전하고 건강한 작업 사례는 인체공학적 주의 사항의 내용을 참조하십시오.

Warning IconA warning icon, calling your attention to a possibly risky situation
경고
이 절차는 초안입니다. 따라서 검증은 되었지만 경고 및 주의 사항이 누락되었을 수 있습니다. 고전압 시스템 및 구성 요소에서 또는 그 근처에서 작업하는 경우에는 안전 요구 사항을 준수하고 최고 수준의 주의를 기울여야 합니다.

탈거

  1. Remove the frunk assembly. See Frunk Assembly (Remove and Install).
  2. Release the clip that attaches the camera nozzle hose to the washer pump, and then disconnect the hose from the washer pump.
  3. Release the clip that attaches the windshield washer hose to the washer pump, and then disconnect the hose from the washer pump.
  4. Disconnect the washer pump electrical connector.
  5. Release the washer pump from the washer tank, and then pull the washer pump upward to remove it from the vehicle.

장착

  1. Position the washer pump into the vehicle, and then secure the pump to the washer tank.
  2. Connect the washer pump electrical connector.
  3. Connect the windshield washer hose to the washer pump, and then secure the clip.
  4. Connect the camera nozzle hose to the washer pump, and then secure the clip.
  5. Install the frunk assembly. See Frunk Assembly (Remove and Install).