교정 코드 1308005111, 1308005112 0.36 메모: 절차에서 명시적으로 언급하지 않는 한 위에 나열된 교정 코드 및 FRT는 연결된 절차를 포함하여 이 절차를 수행하는 데 필요한 모든 작업을 반영합니다. 명시적으로 지시하지 않는 한 교정 코드를 누적하지 마십시오. 참고: FRT와 그 생성 방법에 대한 자세한 내용은 표준 정비 작업시간의 내용을 참조하십시오. 메모: 아래 절차를 수행할 때 개인 보호의 내용을 참조하여 적절한 PPE를 착용했는지 확인하십시오. 참고: 안전하고 건강한 작업 사례는 인체공학적 주의 사항의 내용을 참조하십시오.

1. Open LH rear door
2. Lower LH rear window
3. Partially release LH rear primary door seal

   

4. Remove LH lower C-pillar trim
   참고

   3x clips, 7x tabs, 4x datums, Starting at door sill pull upward then forward to release, Leave trim attached to seat belt

   

   

   

5. Remove 2nd row seatback LH outboard bolster
   참고

   2x tabs, 1x datum, 3x clips, Release tab near the bottom of LH outboard bolster, Partially release LH 2nd row shoulder cover and remove bolster from vehicle

   

   

   

   

   

   

   

   

6. Fold up 2nd row 60 seat
   참고

   Pull tether to release then lift up until locked in place

   

7. Open RH rear door
   참고

   Push RH C-pillar door trigger to release
8. Lower RH rear window
9. Fold up 2nd row 40 seat
   참고

   Pull tether to release then lift up until locked in place

   

   

10. Partially release RH lower C-pillar trim
    참고

    1x clip, 1x datum

    

11. Remove rear wall lower trim
    참고

    2x push clips, 4x clips, Remove outermost push clips, then pull straight forward to release inner clips

    

    

    

    

    

12. Fold down 2nd row 40 seat
    참고

    Pull tether to release then pivot down until locked in place

    

    

13. Disconnect LH 2nd row cushion assembly connectors
    참고

    3x connectors, 5x clips

    

    

    

14. Remove LH 2nd row seat cushion outboard cover
    참고

    1x clip, Pull outward from lower forward section to release

    

    

    

15. Release LH 2nd row cushion from underbelly
    참고

    Pull plastic retainers outward to release from underbelly

    

    

16. Remove LH 2nd row seat underbelly
    참고

    8x clips, Pull outwards from bottom to release

    

    

    

17. Remove LH 2nd row cushion assembly
    참고

    6x clips, Lift upwards off seat frame

    

    

    

    

    

18. Remove LH 2nd row seat buckle closeout assembly
    참고

    2x clips, 4x datums

    

19. Install LH 2nd row seat buckle closeout assembly
    참고

    2x clips, 4x datums

    

20. Install LH 2nd row cushion assembly
    참고

    6x clips, Lower onto seat frame

    

    

    

    

    

21. Install LH 2nd row seat underbelly
    참고

    8x clips, Push inwards to engage clips

    

    

    

22. Secure LH 2nd row cushion to underbelly
    참고

    Secure plastic retainers in channel

    

    

23. Install LH 2nd row seat cushion outboard cover
    참고

    1x clip, Pull outward from lower forward section to release

    

    

    

24. Fold up 2nd row 40 seat
    참고

    Pull tether to release then lift up until locked in place

    

    

25. Connect LH 2nd row cushion assembly connectors
    참고

    3x connectors, 5x clips

    

    

    

26. Install rear wall lower trim
    참고

    2x push clips, 4x clips

    

    

    

    

    

27. Fold down 2nd row 40 seat
    참고

    Pull tether to release then pivot down until locked in place

    

    

28. Fold down 2nd row 60 seat
    참고

    Pull tether to release then pivot down until locked in place

    

    

29. Install LH lower C-pillar tr
    참고

    3x clips, 7x tabs, 4x datums

    

    

    

30. Secure LH rear primary door seal

    

31. Install 2nd row seatback LH outboard bolster
    참고

    2x tabs, 1x datum, 3x clips, Position LH outboard bolster into place, Ensure all clips and tabs are fully engaged, Replace any missing or damaged clips, Secure LH 2nd row shoulder cover, Perform push-pull-push test

    

    

    

    

    

    

    

32. Raise LH rear window
33. Close LH rear door
34. Install RH lower C-pillar trim
    참고

    1x clip, 1x datum

    

35. Raise RH rear window
36. Close RH rear door