2026-03-20

Vehicle Health Check

교정 코드 00030410 메모: 절차에서 명시적으로 언급하지 않는 한 위에 나열된 교정 코드 및 FRT는 연결된 절차를 포함하여 이 절차를 수행하는 데 필요한 모든 작업을 반영합니다. 명시적으로 지시하지 않는 한 교정 코드를 누적하지 마십시오. 참고: FRT와 그 생성 방법에 대한 자세한 내용은 표준 정비 작업시간의 내용을 참조하십시오. 메모: 아래 절차를 수행할 때 개인 보호의 내용을 참조하여 적절한 PPE를 착용했는지 확인하십시오. 참고: 안전하고 건강한 작업 사례는 인체공학적 주의 사항의 내용을 참조하십시오.

Warning IconA warning icon, calling your attention to a possibly risky situation
경고
이 절차는 초안입니다. 따라서 검증은 되었지만 경고 및 주의 사항이 누락되었을 수 있습니다. 고전압 시스템 및 구성 요소에서 또는 그 근처에서 작업하는 경우에는 안전 요구 사항을 준수하고 최고 수준의 주의를 기울여야 합니다.
  • 2026-03-10: Added reference to SC-25-00-016.
  • 2026-01-14: Added the thermal performance test step.
  • 2025-10-15: Released new procedure.
Informational PurposesAn informational icon, calling your attention
참고
This procedure details how to perform the Vehicle Health Check. Make sure to fill out SC-25-00-016, "Vehicle Health Check: Inspection Checklist" as well.

절차

  1. Inspect front external lights.
    Informational PurposesAn informational icon, calling your attention
    참고
    Look for cosmetic damages and humidity ingress.
  2. Inspect rear external lights.
    Informational PurposesAn informational icon, calling your attention
    참고
    Look for cosmetic damages and humidity ingress, it is acceptable for taillights to have some condensation.
  3. Inspect windshield for rock chips and cracks.
    Informational PurposesAn informational icon, calling your attention
    참고
    No damage in driver’s viewing area, airbag impact area, forward camera viewing area, or within 50 mm of edge allowed, No more than 3 cracks or chips to glass allowed.
  4. Check all emergency release cables and switches.
    Informational PurposesAn informational icon, calling your attention
    참고
    Front door releases, Use caution with front door releases as door glass will not drop and could damage seals or bright molding, Remove 2nd row door panel pocket cover to reveal emergency cable.
  5. Function check chargeport door (5 cycles).
    Informational PurposesAn informational icon, calling your attention
    참고
    5x cycles, Inspect and note functionality full range of motion, touch to open, and indicator light. Look for interference with other components, noises such as creaks, groans and clicks, pauses or incomplete actions.
  6. Open tonneau cover.
    Informational PurposesAn informational icon, calling your attention
    참고
    Press forward arrow on LH bed rail.
  7. Close tonneau cover.
  8. Function check LH front door (exterior).
    Informational PurposesAn informational icon, calling your attention
    참고
    Inspect and note functionality for the door handle operation and full range of motion of the door, From outside look for interference with brightwork and door to body, Note any abnormalities.
  9. Function check all windows from the master switch
    Informational PurposesAn informational icon, calling your attention
    참고
    Check operation with door closed, Document any abnormal operation/noises
  10. Function check RH rear door (exterior)
    Informational PurposesAn informational icon, calling your attention
    참고
    Inspect and note functionality for the door handle operation and full range of motion of the door, From outside look for interference with brightwork and door to body, Note any abnormalities
  11. Function check RH rear door (interior)
    Informational PurposesAn informational icon, calling your attention
    참고
    Inspect and note functionality for the interior door release and puddle lamps, From inside look for interference with other components, noises such as creaks, groans and clicks, pauses or incomplete actions
  12. Function check RH rear window
    Informational PurposesAn informational icon, calling your attention
    참고
    Inspect and note functionality for the window switch, and full range of motion of the window with door closed
  13. Function check LH rear door (exterior)
    Informational PurposesAn informational icon, calling your attention
    참고
    Inspect and note functionality for the door handle operation and full range of motion of the door, From outside look for interference with brightwork and door to body, Note any abnormalities
  14. Function check LH rear door (interior)
    Informational PurposesAn informational icon, calling your attention
    참고
    Inspect and note functionality for the interior door switch, From inside look for interference with other components, Note any abnormalities
  15. Function check LH rear window
    Informational PurposesAn informational icon, calling your attention
    참고
    Inspect and note functionality for the window switch, and full range of motion of the window with door closed
  16. Function check RH front door (exterior)
    Informational PurposesAn informational icon, calling your attention
    참고
    Inspect and note functionality for the door handle operation and full range of motion of the door, From outside look for interference with brightwork and door to body, Note any abnormalities
  17. Function check RH front door (interior)
    Informational PurposesAn informational icon, calling your attention
    참고
    Inspect and note functionality for the interior door release, puddle lamps, and manual release cable, From inside look for interference with other components, noises such as creaks, groans and clicks, pauses or incomplete actions
  18. Function check RH front window
    Informational PurposesAn informational icon, calling your attention
    참고
    Inspect and note functionality for the window switch, and full range of motion of the window with door closed
  19. Function check all driver controls
    Informational PurposesAn informational icon, calling your attention
    참고
    Turn signals, steering wheel scroll wheels, horn
  20. Open glove box through UI
    Informational PurposesAn informational icon, calling your attention
    참고
    via Controls > Glovebox
  21. Close the glove box.
  22. Function check power folding side mirrors.
    Informational PurposesAn informational icon, calling your attention
    참고
    Fold mirrors in/out, Check adjustment of glass.
  23. Function check the LH front seat.
    Informational PurposesAn informational icon, calling your attention
    참고
    Check full range of motion of seat, Test lumbar and seat heat/cooling
  24. Function check LH front seat belt
    Informational PurposesAn informational icon, calling your attention
    참고
    Latch and unlatch buckle, Quickly pull retractor to check locking function
  25. Function check the rear seat belts
    Informational PurposesAn informational icon, calling your attention
    참고
    Latch and unlatch buckles, Quickly pull retractor to check locking function
  26. Function check the RH front seat belt
    Informational PurposesAn informational icon, calling your attention
    참고
    Latch and unlatch buckle, Quickly pull retractor to check locking function
  27. Function check RH front seat
    Informational PurposesAn informational icon, calling your attention
    참고
    Check full range of motion of seat, Test lumbar and seat heat/cooling
  28. Function check wipers and spray jets
    Informational PurposesAn informational icon, calling your attention
    참고
    Ensure hood and doors are closed prior to activating wipers, Inspect and note functionality for wipers and wiper jets, Check for full range of motion, speed of motion, interference with other components, noises such as creaks, groans and clicks, pauses or incomplete actions
  29. Open powered front trunk
    Informational PurposesAn informational icon, calling your attention
    참고
    Via exterior switch or UI
  30. Fill washer reservoir with fluid
  31. Remove the frunk assembly. See Frunk Assembly (Remove and Install).
  32. Perform inspection of under hood area
    Informational PurposesAn informational icon, calling your attention
    참고
    Perform inspection of vehicle under hood area, Check for signs of abnormal damage, wear, heavy rust, wiring damage, or impact damage, Pay attention to safety related component and note any items of significance
  33. Visually inspect brake fluid level
  34. Inspect coolant level and top off as necessary
    Informational PurposesAn informational icon, calling your attention
    참고
    Ensure that the fluid level is at the Max line, Top off fluid as required
  35. 터치스크린에서 정비 모드 "렌치"(터치스크린 UI 하단)를 탭한 다음 Thermal > Actions > Test Thermal Performance를 탭하고 Run을 클릭하여 루틴이 완료될 때까지 기다립니다.
  36. Remove all the 4 wheels. See 휠 어셈블리(탈거 및 장착).
  37. Record the tread depth for LH rear tire
    Informational PurposesAn informational icon, calling your attention
    참고
    Measure and record the outer, center, and inner tread depths, Measure the circumferential tire grooves only, Do not place the tire tread gauge probe on the molded treadwear indicators, Recommend replacement if tread depth is 4/32in (3mm) or less
  38. Measure and record LH rear brake pad thickness
    Informational PurposesAn informational icon, calling your attention
    참고
    Recommend replacement if 2mm or less, Check both inboard and outboard pads
  39. Inspect LH rear brake rotor condition
    Informational PurposesAn informational icon, calling your attention
    참고
    Check for excessive rust or wear, Minimum spec 26mm
  40. Record tread depth for RH rear tire
    Informational PurposesAn informational icon, calling your attention
    참고
    Measure and record the outer, center, and inner tread depths, Measure the circumferential tire grooves only, Do not place the tire tread gauge probe on the molded treadwear indicators, Recommend replacement if tread depth is 4/32in (3mm) or less
  41. Measure and record RH rear brake pad thickness
    Informational PurposesAn informational icon, calling your attention
    참고
    Recommend replacement if 2 mm or less, Check both inboard and outboard pads
  42. Inspect RH rear brake rotor condition
    Informational PurposesAn informational icon, calling your attention
    참고
    Check for excessive rust or wear, Minimum spec 26mm
  43. Record tread depth for RH front tire
    Informational PurposesAn informational icon, calling your attention
    참고
    Measure and record the outer, center, and inner tread depths, Measure the circumferential tire grooves only, Do not place the tire tread gauge probe on the molded treadwear indicators, Recommend replacement if tread depth is 4/32in (3mm) or less
  44. Measure and record RH front brake pad thickness
    Informational PurposesAn informational icon, calling your attention
    참고
    Recommend replacement if 2mm or less, Check both inboard and outboard pads
  45. Inspect RH front brake rotor condition
    Informational PurposesAn informational icon, calling your attention
    참고
    Check for excessive rust or wear, Minimum spec 30mm
  46. Record tread depth for LH front tire
    Informational PurposesAn informational icon, calling your attention
    참고
    Measure and record the outer, center, and inner tread depths, Measure the circumferential tire grooves only, Do not place the tire tread gauge probe on the molded treadwear indicators, Recommend replacement if tread depth is 4/32in (3mm) or less
  47. Measure and record LH front brake pad thickness
    Informational PurposesAn informational icon, calling your attention
    참고
    Recommend replacement if 2mm or less, Check both inboard and outboard pads
  48. Inspect LH front brake rotor condition
    Informational PurposesAn informational icon, calling your attention
    참고
    Check for excessive rust or wear, Minimum spec 30mm
  49. Check all four tire pressures manually
    Informational PurposesAn informational icon, calling your attention
    참고
    4x tires, Set to specification if necessary, Refer to the "Tire and Loading Information" label located on the driver side B-pillar, Inspect wheels and tires for any bulges or damage while checking/setting pressures
  50. Raise the vehicle to a comfortable working height, and lower the lift onto locks.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    경고

    Make sure there is an audible click of the locks on both sides before lowering, otherwise the vehicle may tilt to one side.

    Make sure that the doors are clear of surrounding objects.

  51. Perform visual inspection of HV battery enclosure
    Informational PurposesAn informational icon, calling your attention
    참고
    Check for any dents, scrapes, or other damage
  52. Remove the front aero shield. See Aeroshield - Front (Remove and Install).
  53. Remove front skid plate
    Informational PurposesAn informational icon, calling your attention
    참고
    8x nuts, 15mm, 50 Nm, 2x bolts, 11mm, 50 Nm
  54. Remove the rear skid plate. See Skid Plate - Rear (Remove and Install).
  55. Remove the rear aero shield. See Aeroshield - Rear (Remove and Install).
  56. Perform inspection of suspension components
    Informational PurposesAn informational icon, calling your attention
    참고
    Check conditions of ball joints and bushings, etc, Inspect for any loose fasteners, Carefully apply pressure with a pry bar as needed
  57. Perform inspection of steering components
    Informational PurposesAn informational icon, calling your attention
    참고
    Check steering gear joints and electrical connections, Verify components are not bent or damaged
  58. Perform visual inspection of underside of vehicle for any coolant leaks
    Informational PurposesAn informational icon, calling your attention
    참고
    Pay special attention to hose connection points
  59. Perform inspection of vehicle underside components front and rear
    Informational PurposesAn informational icon, calling your attention
    참고
    Perform inspection of vehicle underside front and rear, Check for signs of abnormal damage, wear, heavy rust, wiring damage, or impact damage, Pay attention to safety related component and note any items of significance
  60. Install the rear aero shield. See Aeroshield - Rear (Remove and Install).
  61. Install the rear skid plate. See Skid Plate - Rear (Remove and Install).
  62. Install the front aero shield. See Aeroshield - Front (Remove and Install).
  63. Install all the 4 wheels. See 휠 어셈블리(탈거 및 장착).
  64. Install the frunk assembly. See Frunk Assembly (Remove and Install).
  65. ODIN 루틴 실행 PROC_ICE_X_ENTER-SERVICE-MODEvia Toolbox:(link)
  66. Check for active alerts
    Informational PurposesAn informational icon, calling your attention
    참고
    Check alert using UI via service mode > active alerts" to "Check alerts using UI via Service Mode > Service Alerts > Active Alerts
  67. Update vehicle firmware if available
    Informational PurposesAn informational icon, calling your attention
    참고
    Select the clock on the center display, or go to the Software tab, then select install now to start firmware update. Select Install Now, Tap count down timer until clock runs down to 0, Check the center display and ensure the firmware package is installing
  68. Exit Service Mode through UI
    Informational PurposesAn informational icon, calling your attention
    참고
    Press and hold the Exit Service Mode button for 3 seconds