교정 코드 1710091002 1710091001 0.90 메모: 절차에서 명시적으로 언급하지 않는 한 위에 나열된 교정 코드 및 FRT는 연결된 절차를 포함하여 이 절차를 수행하는 데 필요한 모든 작업을 반영합니다. 명시적으로 지시하지 않는 한 교정 코드를 누적하지 마십시오. 참고: FRT와 그 생성 방법에 대한 자세한 내용은 표준 정비 작업시간의 내용을 참조하십시오. 메모: 아래 절차를 수행할 때 개인 보호의 내용을 참조하여 적절한 PPE를 착용했는지 확인하십시오. 참고: 안전하고 건강한 작업 사례는 인체공학적 주의 사항의 내용을 참조하십시오.

1. Remove the LH 1st row seat assembly from the vehicle, and then place it on a protected surface. See Seat Assembly - 1st Row - LH (Remove and Install).
   참고

   Recommended assistance. Position so that the underside of the seat is accessible.

   

2. Remove the LH 1st row seat outboard side shield. See Side Shield - Outboard - 1st Row Seat - LH (Remove and Install).
3. Remove LH front seat outboard side shield carrier
   참고

   2x clips, 2x tabs, Release leading edge of trim and slide away from seat frame

   

   

4. Remove the LH 1st row seat inboard side shield. See Side Shield - Inboard - 1st Row Seat - LH (Remove and Install).
5. Remove LH front seat inboard side shield carrier
   참고

   2x clips, 1x datums, Release leading edge of trim and slide away from seat frame

   

   

   

6. Disconnect LH front seat buckle harness
   참고

   1x connector

   

7. Release seat back elastic straps from seat frame
   참고

   2x straps

   

8. Unzip LH front seatback trim
   참고

   2x zippers, Pull tails of zippers outside seatback then unzip, Use of a straight pick can aid in moving zipper pulls

   

   

   

   

9. Fold LH front seat back trim
   참고

   2x clips, Fold material upward

   

   

   

   

   

   

10. Disconnect LH front seat harness connectors
    참고

    14x connectors

    

    

    

    

    

    

    

    

    

11. Remove LH front seat harness
    참고

    15x clips

    

    

    

    

    

12. Install LH front seat harness
    참고

    15x clips

    

    

    

    

    

13. Connect LH front seat harness connectors
    참고

    14x connectors

    

    

    

    

    

    

    

14. Unfold LH front seat back trim
    참고

    2x clips,

    

    

    

    

    

    

15. Zip LH front seatback trim
    참고

    2x zippers, Zip each side of seatback trim then tuck in tails, Use of a straight pick can aid in moving zipper pulls

    

    

    

    

16. Install seat back elastic straps onto seat frame
    참고

    2x straps

    

17. Install LH front inboard side shield carrier
    참고

    2x clips, 2x tabs, Position leading edge of trim and slide into seat frame

    

    

    

18. Install the LH 1st row seat inboard side shield. See Side Shield - Inboard - 1st Row Seat - LH (Remove and Install).
19. Install LH side shield carrier onto LH front seat
    참고

    2x clips, 2x tabs, Slide forward onto seat frame aligning clips and tabs

    

    

20. Install the LH 1st row seat outboard side shield. See Side Shield - Outboard - 1st Row Seat - LH (Remove and Install).
21. Install the LH 1st row seat assembly. See Seat Assembly - 1st Row - LH (Remove and Install).