2026-03-13
Corner Bracket - Tonneau - LH (Long Range) (Remove and Install)
교정 코드
11200100301
0.60
메모: 절차에서 명시적으로 언급하지 않는 한 위에 나열된 교정 코드 및 FRT는 연결된 절차를 포함하여 이 절차를 수행하는 데 필요한 모든 작업을 반영합니다. 명시적으로 지시하지 않는 한 교정 코드를 누적하지 마십시오.
참고: FRT와 그 생성 방법에 대한 자세한 내용은 표준 정비 작업시간의 내용을 참조하십시오.
메모: 아래 절차를 수행할 때 개인 보호의 내용을 참조하여 적절한 PPE를 착용했는지 확인하십시오.
참고: 안전하고 건강한 작업 사례는 인체공학적 주의 사항의 내용을 참조하십시오.
경고
이 절차는 초안입니다. 따라서 검증은 되었지만 경고 및 주의 사항이 누락되었을 수 있습니다. 고전압 시스템 및 구성 요소에서 또는 그 근처에서 작업하는 경우에는 안전 요구 사항을 준수하고 최고 수준의 주의를 기울여야 합니다.
- 2025-06-21: Released new procedure.
-
Open tailgate
참고Press button to release
-
Remove LH sail applique
참고15x clips, 1x connector, 1x harness clip, Lift rear edge first to remove connector and harness clip
-
Remove LH upper bed side wall assembly
참고13x clips, Start from rear, Pull from the bottom downwards
-
Remove LH tonneau cam block
참고2x bolts, 8mm, 10Nm
-
Remove LH Tonneau horizon rail assembly
참고4x bolts, 8 mm, 10Nm, 5x bolts, 10 mm, 10Nm
-
Remove tonneau upper applique
참고4x bolts, T25, 10Nm, Release lower bolts, Pivot applique upwards, Release pivot bolts, Remove applique
-
Remove LH tonneau applique hinge pivot
참고1x bolt, T25, 10Nm
-
Remove tonneau lower applique
참고2x bolts, T30, 10Nm
-
Remove LH tonneau corner bracket
참고1x bolt, 10mm, 10Nm, 1x nut, 10mm, 10Nm
-
Install LH tonneau corner bracket
참고1x bolt, 10mm, 10Nm, 1x nut, 10mm, 10Nm
-
Install tonneau lower applique
참고2x bolts, T30, 10Nm
-
Install LH tonneau applique hinge pivot
참고1x bolt, T25, 10Nm
-
Install tonneau upper applique
참고4x bolts, T25, 10Nm, Install pivot bolts, Pivot applique downwards, Install lower bolts,
-
Install LH Tonneau horizon rail assembly
참고4x bolts, 8 mm, 10Nm, 5x bolts, 10 mm, 10Nm
-
Install LH upper bed side wall assembly
참고13x clips, Replace any missing or damaged clips, Lift tonneau seal as required
-
Install LH tonneau cam block
참고2x bolts, 8mm, 10Nm
-
Install LH sail applique
참고15x clips, 1x connector, 1x harness clip, Replace any broken clips
-
Close tailgate