03/07/2024 16:00:19
Rear Frame Rail Reinforcement (Lower)
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- Properly mount the vehicle on a frame bench when performing this procedure.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | PANEL, REAR RAIL LOWER REINF (Rear Frame Rail Reinforcement – Lower) |
|
| 2 |
High Strength Structural Rivet, 6.5 mm
|
|
| 8 |
Bolt
,
M6-1.0X12,FHCS,DIN6921,G10.9,ZF720 |
Tesla part number 1008770-00-A. |
| 8 |
Nut
,
HEX,FLG,M6-1.0X14[ST]-P-04 |
Tesla part number 1016227-00-A. |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
Remove the Rear Frame Rail to Lower Quarter Extension.
-
Remove the Rear Frame Rail (Upper).
-
Remove the Rear Frame Rail (Lower).
-
Remove the original component.
-
Prepare for installation.
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
-
Install the new component or components.
Torque the nuts and bolts to 13 Nm.
-
Install the Rear Frame Rail (Lower).
-
Install the Rear Frame Rail (Upper).
-
Install the Rear Frame Rail to Lower Quarter Extension.
- Perform any necessary post-repair operations.
