Rear Frame Rail to Lower Quarter Extension
Correction code:
10101812902
10101813002
NOTE:
Unless explicitly stated in the procedure, the above
correction code includes all Collision Repair work required
to perform this procedure, including the linked Collision
Repair procedures. Do not stack Collision Repair
correction codes unless explicitly told to do
so. Add any associated mechanical procedures
needed to perform this procedure.
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | M3 Extn-Rail to Rr Qtr Lwr (Rear Frame Rail to Lower Quarter Extension) | |
| 11 | Rivet, 4.8 mm |
Repair Procedure
- Wheel Assembly (Remove and Install).
- Wheel Arch Liner - Rear - LH (Remove and Replace).
- Carpet - Rear Trunk (1-Piece) (Remove and Replace).
- Trim - Side - Trunk - LH (Remove and Replace).
- Air Extractor - LH (Remove and Replace).
- Fascia - Rear (Remove and Install).
-
Remove the original component.
or Factory Spot Welds
-
Prepare for installation.
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
- Install the new component or components.
- Perform any necessary post-repair operations.
- Fascia - Rear (Remove and Install).
- Air Extractor - LH (Remove and Replace).
- Trim - Side - Trunk - LH (Remove and Replace).
- Carpet - Rear Trunk (1-Piece) (Remove and Replace).
- Wheel Arch Liner - Rear - LH (Remove and Replace).
- Wheel Assembly (Remove and Install).