Roof Rack Brackets

Repair Information

Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
This procedure can be completed without using a frame bench.

Parts List


Quantity	Description	Image / Notes
1 each, as needed	M3, ROOF RACK, FR, LH (Roof Rack Bracket – LH Front) M3, ROOF RACK, RR, LH (Roof Rack Bracket – LH Rear) M3, ROOF RACK, FR, RH (Roof Rack Bracket – RH Front) M3, ROOF RACK, RR, RH (Roof Rack Bracket – RH Rear)	Note Each roof rack bracket (front LH, front RH, rear LH, and rear RH) has a different part number. Order the correct replacement bracket for each bracket being replaced.
2 rivets per bracket	Structural Countersunk Rivet, 6.5 mm

When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.

Repair Procedure

Remove the original component.

or Factory Spot Welds
Prepare for installation.

Note
A red X indicates a location where a factory-installed fastener is not being replaced.

or Structural Countersunk Rivets, 6.5 mm
Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
Install the new component or components.

Note
Remove a small area of the NVH foam under the new component to allow clearance for the rivets.
Perform any necessary post-repair operations.