2025-08-06

Front Shock Tower Support (Front)

Correction code: 10101002902 10101015402 NOTE: Unless explicitly stated in the procedure, the above correction code includes all Collision Repair work required to perform this procedure, including the linked Collision Repair procedures. Do not stack Collision Repair correction codes unless explicitly told to do so. Add any associated mechanical procedures needed to perform this procedure.

Parts List

Quantity Description Image / Notes
1 ASY, SHOCK TWR SUP FR (Front Shock Tower Support – Front)
23 High Strength Structural Rivet, 6.5 mm
2 Structural Bulb Rivet, 6.5 mm
3 Bolt , HF,M8-1.25x16 Tesla part number 1011818-00-A.
3 Nut , HF M8-1.25 Tesla part number 1006628-01-A.

When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.

Repair Procedure

  1. Remove the original component.
    or Factory Spot Welds
  2. Prepare for installation.
    Informational PurposesAn informational icon, calling your attention
    Note
    A red X indicates a location where a factory-installed fastener is not being replaced.
    or High Strength Structural Rivets, 6.5 mm
    • A = 16 mm.
    • B = 9 mm.

    or Structural Bulb Rivets, 6.5 mm

    or Bolts

    Nut
  3. Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
  4. Install the new component or components.
    Torque the bolts to 22 Nm.
  5. Perform any necessary post-repair operations.