2025-08-06

Longitudinal Upper

Correction code: 10101004002 10101004102 NOTE: Unless explicitly stated in the procedure, the above correction code includes all Collision Repair work required to perform this procedure, including the linked Collision Repair procedures. Do not stack Collision Repair correction codes unless explicitly told to do so. Add any associated mechanical procedures needed to perform this procedure.

Repair Information

Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
This procedure can be completed without using a frame bench.

Parts List


Quantity	Description	Image / Notes
1	LONGITUDINAL UPPER (Longitudinal Upper)
10	High Strength Structural Rivet, 6.5 mm
4	Countersunk Rivet, 4.8 mm Long
1	Rivet, 4.8 mm

When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.

Repair Procedure

Remove the Dash Reinforcement Assembly.
Remove the original component.
or Factory Spot Welds
Prepare for installation.
or High Strength Structural Rivets, 6.5 mm
- A = 73 mm.
- B = 64 mm.
or Countersunk Rivets, 4.8 mm Long

or Rivets, 4.8 mm
Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
Install the new component or components.
Install the Dash Reinforcement Assembly.
Install the fasteners as indicated.
Perform any necessary post-repair operations.