18/05/2023 20:44:31

背板 - 第二排座椅 - 中间/20 百分比（七座）（拆卸和更换）

校正代码 13082332 注意：除非本程序中另有明确规定，否则上述校正代码和 FRT 反映的是执行本程序（包括关联程序）所需的所有工作。除非明确要求，否则请勿堆叠校正代码。 注意：请参阅平均维修工时，深入了解 FRT 及其创建方式。要提供有关 FRT 值的反馈，请发送电子邮件至LaborTimeFeedback@tesla.com。 注意：请参阅人员保护，确保在执行以下程序时穿戴适当的个人防护装备 (PPE)。

拆卸

  1. Open the LH rear door and lower the LH rear window.
  2. Move the LH 2nd row seat back forward.
  3. Release the center 2nd row seat switch, disconnect the switch connector, and then remove the switch from the seat assembly.
    提示： Use a plastic trim tool pry the top of the switch away from center seat back panel.
  4. Release the clips (x5) that attach the center 2nd row seat back panel to the center seat assembly, slide the panel forward to release the hooks (x2), and then remove the panel from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    注
    Early production vehicles may have 4 hooks.

安装

  1. Insert the center 2nd row seat back panel hooks (x2) into the center seat back assembly, and then slide the panel rearward into position.
    Informational PurposesAn informational icon, calling your attention
    注
    Early production vehicles may have 4 hooks.
  2. Secure the clips (x5) that attach the center 2nd row seat back panel to the center seat back assembly.
  3. Position the center 2nd row seat switch into the vehicle, connect the switch connector, and then install the switch into the seat assembly.
  4. Move the LH 2nd row seat back into the original position.
  5. Raise the LH rear window and close the LH front door.