2026-07-14
Lavspenningsbevarer (koble til og fra)
Korrigeringskode 17010500 0.06 MERK: Hvis ikke noe annet er uttrykkelig oppgitt i prosedyren, gjenspeiler korrigeringskoden og FRT ovenfor, alt arbeidet som kreves for å gjennomføre denne prosedyren, inkludert de tilknyttede prosedyrene. Ikke stable korrigeringskoder med mindre du bli uttrykkelig bedt om det. MERK: Se Flat rate-tider for å lære mer om FRT-er og hvordan de lages. MERK: Se Personlig beskyttelse for å forsikre deg om at du bruker riktig PVU når du gjennomfører prosedyren nedenfor. MERK: Se Forholdsregler for ergonomi for trygge og sunne arbeidspraksiser.
- 2026-07-07: Deleted steps to disconnect/connect the 12V/LV battery.
- 2025-12-05: Added a caution to make sure windows are not moved for at least 1 minute before disconnecting the LV maintainer.
- 2023-10-31: Updated the location to attach the maintainer's negative clamp with new images attached.
ADVARSEL
Før du kobler fra lavspenningsbevareren, må du passe på at vinduer ikke beveges i minst 1 minutt. Hvis du ikke venter før du kobler fra, kan det føre til komponentskade.
Koble til
- Enable Service Mode. See Servicemodus.
-
Release the positive terminal cover.
-
Secure the LV maintainer positive terminal to the jump post.
ADVARSELTo avoid damaging the vehicle, DO NOT allow the positive cable to make contact with other metal components.
-
Secure the LV maintainer negative terminal to the VCFront bracket bolt (as indicated on the VCFront label).
- Connect the LV maintainer to a power supply, and then power on.
Disconnect
- Power off the LV maintainer.
-
Release the negative terminal connection from the vehicle first, and then release the positive terminal.
-
Install the positive terminal cover.
-
Confirm that the LV battery State Of Charge (SOC) is above 73% and Battery State is Charge or Standby.
MerkIf the LV battery SOC is below 73% confirm that Battery State is Charge and Pack Current is positive, Via Tesla Garage > LV.