B–Pillar Reinforcement
Correction code:
10100112802
10100112902
NOTE:
Unless explicitly stated in the procedure, the above
correction code includes all Collision Repair work required
to perform this procedure, including the linked Collision
Repair procedures. Do not stack Collision Repair
correction codes unless explicitly told to do
so. Add any associated mechanical procedures
needed to perform this procedure.
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
Quantity | Description | Image / Notes |
---|---|---|
1 | REINFORCEMENT, B-PILLAR SILL (B–Pillar to Sill Reinforcement) |
![]() |
8 |
![]() |
Tesla part number 1021165-00-A. |
1 |
![]() |
Tesla part number 2007207. |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
- Remove the original component.
- Prepare for installation.
-
Install the new component or components.
Torque the fasteners to 10 Nm.NoteThese components are secured with fasteners and no structural adhesive is required.
- Perform any necessary post-repair operations.