Rear Bumper Plate Shim

Repair Information

Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
This procedure can be completed without using a frame bench.

Parts List


Quantity	Description	Image / Notes
1	SHIM-MX BUMPER RR (Rear Bumper Plate Shim)
2	SPR, 5x4	Tesla part number 1026936-00-A.

When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.

Repair Procedure

Remove the Rear Panel (Complete).
Remove the original component.
Factory SPR
Prepare for installation.
or SPRs, 5x4

Note
The following Tesla SPR die is required to install this SPR: FM 090 2120.
- A = 23 mm
- B = 44 mm
- C = 24 mm
- D = 87 mm
Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
Install the new component or components.
Install the Rear Panel (Complete).
Perform any necessary post-repair operations.