Falcon Door Striker Bracket

Repair Information

Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
This procedure can be completed without using a frame bench.

Parts List


Quantity	Description	Image / Notes
1	Asy, Flcn Dr Striker Brkt (Falcon Door Striker Bracket)
3	Structural Rivet, 6.5 mm Short
3	Countersunk Rivet, 4.8 mm Short
1	Countersunk Rivet, 4.8 mm Long
2	Bolt, Torx-head	Tesla part number 1014747-00-B.

When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.

Repair Procedure

Remove the original component.
or Bolt, Torx-head
or Drill through factory spot welds
Note
When drilling out spot welds, use a drill bit that creates a hole correctly sized for the fastener that will replace the spot weld.

or RIVTAC
Prepare for installation.
or Structural Rivets, 6.5 mm Short
or Countersunk Rivets, 4.8 mm Short

or Countersunk Rivets, 4.8 mm Long

or Bolt, Torx-head
Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
Install the new component or components.
Torque the bolts to 25 Nm.
Perform any necessary post-repair operations.