Huck Fasteners Used in Collision Repair Procedures
Describes the alternative fasteners that can be used in place of HUCK fasteners (BOMs, pin and collar, and 8 mm blind rivets) in certain Collision Repair procedures.
The table below lists each Huck fastener, the procedures it is used in, and the alternative fasteners for each procedure.
Originally Specified Fastener | Tesla P/N | Repair Procedure | Alternative Fastener | Tesla P/N |
---|---|---|---|---|
1/4 inch (6.25 mm) Pin and Collar | 1062556-00-A | 6.5mm Commonized Structural Rivet | 1062559-00-A | |
6.5mm Structural Bulb Rivet | 1063943-00-A | |||
5/16 Inch (8 mm) Pin and Collar | 1062557-00-A |
M8-1.25x16 Bolt and M8x1.25 Nut |
1005582-00-A and 2007088 |
|
5/16 Inch (8 mm) Blind Rivet | 1058710-00-A |
M8-1.25x16 Torx Bolt and M8-1.25 Nut |
1008833-01-A and 1006628-01-A |
|
M8-1.25x16 Bolt and M8x1.25 Nut |
1005582-00-A and 2007088 |