Front Motor Mount RH Vehicles Built Between October 15, 2016 and April 22, 2019
     Correction code: 
    10101006602
    10101006702
    
          NOTE:
                                        Unless explicitly stated in the procedure, the above
                                        correction code includes all Collision Repair work required
                                        to perform this procedure, including the linked Collision
                                        Repair procedures. Do not stack Collision Repair
                                                correction codes unless explicitly told to do
                                                so. Add any associated mechanical procedures
                                        needed to perform this procedure.
    Correction code: 
    10101006602
    10101006702
    
          NOTE:
                                        Unless explicitly stated in the procedure, the above
                                        correction code includes all Collision Repair work required
                                        to perform this procedure, including the linked Collision
                                        Repair procedures. Do not stack Collision Repair
                                                correction codes unless explicitly told to do
                                                so. Add any associated mechanical procedures
                                        needed to perform this procedure.
  
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- Properly mount the vehicle on a frame bench when performing this procedure.
Parts List
| Quantity | Description | Image / Notes | 
|---|---|---|
| 1 | MOTOR MOUNT FR RH (Front Motor Mount RH) | |
| 3 | Bolt, hex-head | Tesla part number 1008722-00-A. | 
| 4 | Bolt, Torx-head | Tesla part number 1004379-00-A. | 
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
- 
          
            
          Remove the original component.
          
          
          
- 
          
            
          Prepare for installation.
          
          
          
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
- 
          
            
          Install the new component or components.
          
          Torque as follows:- Screws, M5-0.8X16MM: 6 Nm
- Bolts, BOLT HF M8x30 PC109 ADH MAT: 30 Nm
 
- Perform any necessary post-repair operations.